Emulsifying Agents

Gear emulsifier of radial balance. Emulsifying machine work gear, radial hydraulic pressure in the gears and bearings. Emulsifier for suction Chamber on the right side, a pressure on the left pocket. Oil pressure on hydraulic force is applied to the gear inside the cavity, along the top of the leaking oil, has the pressure of varying sizes, is the gears and bearings are radial balance. Hydraulic pressure is higher, the greater is the unbalanced force, which not only accelerated bearing wear, reduced bearing life, or even drive shaft deflection, resulting in top wall friction, and Emulsifying the body.

Emulsion lift higher emulsification temperature and mold temperature are an improvement measures to solve the problem. Increases emulsion temperature, can have a temperature sufficient to keep the emulsion of liquidity, but the rise in temperatures to lay the PVC burnt as a precondition. During this process, if you add a bit of back pressure, the effect will be much more satisfactory. Actual production, generally do not need to set the temperature on the emulsification, and need to add a bit of backpressure. Because of the increased back pressure can not only get more Pu PVC emulsion temperature liquid, but also have a warming effect, so better than rise emulsification temperatures to improve liquidity separately. Both rise emulsification temperatures and increasing back pressure, extremely easy to produce PVC burning issue.