Magnetic Trackers

  • Description
Product Detail

Parameter

Model Name: CA-P3C

Type: Magnet GPS Tracker

Network: GSM/GPRS

Band: 850/900/1800/1900MHz

GPS Chip: UBLOX Chip

GPS Sensitivity: -162dBm

GPS accuracy: 10 meters

Time To First Fix: Cold status 35-80seconds

Charger: AC110V -220V input DC5V output

Battery: 3.7V 5000mAh

Standby time:  100days.


Product Introduction:

CA-P5C is one large battery GPS Tracker product with magnet. The battery is 3.7V 5000mAh rechargeable Li-ion battery. It can be charged for more than 10000times.

And the standby time is about 50days. It works only by built-in battery and no power cable.

And it contains 6pcs circular magnets so it is easy to install.


Main Features:

1. Check current position and playback history routes.

2. Low battery alarm and Geo fence function.

3. Sleeping mode for longer work time.

4. Over speed alarm for safe driving.

5. Vibration sensor for shake alarm


Product Picture:

P3C-11005.png 

P3C-11007.png 


Installation Instruction:

This GPS Tracker device has no power cable and it works via 5000mAh built-in battery.

So it is easy to install, only need to put it in one secret place or it can be adsorbed on one metal. Of course the GPS antenna side should face up to the sky for receiving GPS signal better. This device works via one 2G GSM SIM card and open GPRS function. When you insert MINI SIM Card into the card slot, the device starts to work automatically. Then the current positioning data will be uploaded to server.


LED Indication:

1. Blue LED for GPS signal status

Status of LED

Meaning

Slow flash

GPS device is searching GPS signal

Always is on

GPS module works normally and received GPS signal

Off

No power or sleeping mode

 

2. Yellow LED for GSM signal status

Status of LED

Meaning

Slow flash

GPS device is searching GSM signal

Always is on

GSM module works normally and received GSM signal

Off

No power or sleeping mode


3. Red LED for power charging status

Status of LED

Meaning

Always is on

Device is charging and not full

Off

The battery is charged full or power is off


SMS commands Instruction:

1. Platform server IP and Port Setting

SMS command format: IP+space+IP address+space+port

For example:  IP 119.147.42.206 9881

Reply: Set IP OK

2. SIM Card APN setting

SMS command format: apn+password+space+your local apn name

For example: apn123456 CMNET

123456 is password and CMNET is the APN name of your SIM Card.

Reply: APN is ok

Notes: APN stands for accessing point name. if you need more information about the local APN, inquire with your local GPRS network operator.


Factory Picture:

P3C-12781.png 


FAQ:

Question1: What kinds of battery dose this model use?

           It uses 5000mAh rechargeable Li-ion battery.

Question2: How to change platform IP and Port?

           The SMS command is IP+space+IP ADDRESS+space+Port

Question3: What is your platform website?

           Our platform website is www.zcbgps.com

Question4: How about warranty?

           It is one and half year.


Send your message to this supplier
To:  

Shenzhen Cartracker Technology Co.,Ltd

* Content:  

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity:  
  
You May Like
Not exactly what you want? One request, multiple quotations Get Quotations Now >>
China Mainland Favorites
Transaction Level:

* Quantity:

You May Like