GPS Vehicle Tracking System

Parameters:

Device Name: CA-V2A

Size: 90mm*45mm*13.8mm

GPS sensitivity: -159dBm

Frequency: Quad band

Accuracy: Less than 5meters

Working environment temperature: -20? to +70?

Working environment Humidity: 20% to 80% RH

Weight: 40g

Application: Truck or Car

Antenna: Ceramic

Battery: 180mAh rechargeable 

Warranty: one year

Certificate: CE Rosh FCC

Protocol: GT06 protocol

Product Introduction:

CA-V2A contains the newest APN all over the world. And we can set many functions via SMS commands. It is very easy for different customers. Generally you don't need to set APN command, because it contains most of APNs. If you want to change another server, you only need to send SMS command #6666#IP#new IP#port# to change it, very simple.

SMS commands:

1. Apply Voice monitoring

This is one optional function, the SMS Command format: #Password#OM#

For example: #6666#OM#

2. Cancel voice monitoring

SMS command format is #Password#CM#

For example: #6666#CM#

3. Re-start device

SMS command format: #Password#Reset#

For example: #6666#RESET#

Replies: Start Reset System, OK!

It stands for device will be re-started in 8-18seconds.

4. Restore factory setting except IP

SMS Command format: #Password#Factory#

Replies: Resume factory parameter, OK!

It means restore settings to factory standard except IP and port.

Product Display:

LED Indicator:

1. Power LED indicator: Red LED

2. GSM LED Indicator:  Blue LED    

3. GPS LED Indicator:  Green LED

How to install?

1. About the wireless diagram, please refer to instruction.

2. This model uses built-in antenna, make sure the GPS antenna side should face up to the sky. And no any metal above the device. Because if it under one metal, The device can not receive satellite signal better.

3. After you insert SIM card to card slot, make sure turn on the battery switch.

Application:

FAQ:

Question 1:  How long the built-in battery can work?

            Generally it can work about 1-2hours.

Question 2:  Can I use my own shell and use your PCB?

             Yes, no problem.

Question 3:  I want to add some additional functions, can you design it?

             We need to know your detailed requirements, then evaluate whether we can do it by this models.

Question 4:  Dose it support blind area data?

             Yes, it supports 1000pcs blind area data.