30TPH Reverse Osmosis Water Filter Treatment

CK-RO-30T Reverse Osmosis Water Treatment

1. Design Basis 

n  Raw water source : well/groundwater

n  Raw water analysis report : unconfirmed

n  RO system rated flux : 30 m3/h

n  RO system recovery : 50-65%

n  Salt rejection : 96%-99%

n  RO working voltage : 220V/380V/50Hz

n  RO system power : 5.1KW

n  Water feeding pressure : 0.15-0.25Mpa

2. Flow Chart Of RO Water Treatment Machine

3. System Configuration

u  Raw water supply pump: To use CNP.

u  High-pressure pump: To use CNP. 

u  Reverse Osmosis Membrane: To use VONTRON, China

u  Pretreatment device: To use FRP tank with automatic valve.

u  Conduit: To use SS304.

u  Electric standard configuration: PC automatically control

u  Electrical components: To use Zhengtai’s and Schneider’s products.

u  Frame: To use stainless steel.

4. Brief Introduction to the Equipment

5. Feed Water(Source Water)

River Water, well water, Tap water, Underground water, Seawater, Lake water etc.

 6. Introduction

The company’s CK-RO series reverse osmosis device for electronics, electroplating, power plants, pharmaceutical,petroleum, chemical, food and beverage and printing fields to provide high quality water, reverse osmosis pure water technology is the most advanced, the most economic and the most effective system in water treatment industry, which is a process to push high-content salt water reverse into lower salt water by press water into ro membrane. By this, most hazardous substances, heavy metal, soluble solid are wiped off. Then only water molecules can go through the membrane to be pure water.

5. Consumables Replacement Cycle

NO.	ITEM	Replacement cycle
1.	Pure water   silica sand	2~3yeas
2.	Pure water   activated carbon	1~2yeas
3.	Pp cartridge   filter	2~3month
4.	RO membrane	2~3yeas

Remarks:

Source water conditions	Raw water quality: groundwater, tap water, river water, special water   quality conditions need to be based on water quality report design
	Water production: 30 T / hour; water quality = 10us / cm; (raw water: =   300us/cm)
	Quality of water: World Health Organization standards for drinking   water reached; the RO membrane salt rejection of 99% or more
External conditions	Power requirements: 380V / 220V; 50Hz; special circumstances can be   produced according to customer requirements
	Venue requirements: indoor installation, temperature 5-45 ?.

6. Technical training

1.Supplier provides technical training for free; we are responsible to provide site training for personnel of buyer, until they are of good operation skills.

   2. Supplier provides training for maintenance people; if the training carries out at the supplier’s site, the buyer is responsible for their travel expense.

   3. Training content:

Ø  Basic theoretical knowledge of reverse osmosis

Ø  Equipment structure

Ø  Membrane cleaning

Ø  Installation, debugging, operation

Ø  Maintenance, repair

7. Quality Assurance And Service

1. Our Company is responsible for allocating professional engineers to the site for installation and debugging, conducting comprehensive technical training, explaining detail of technical drawings, working principles, techniques flow chart, operation manuals etc. After the training, the operators can fully understand the techniques of the whole system. They can find general fault of the system and do maintenance.

3. After accepted by the buyer, the equipment enjoys 12 months’ quality warranty for free. If the equipment fails to work within 12 months, we will be responsible for free repair. The supplier provides long-term after-sale service, free technical and training services.