100TPH Reverse Osmosis Water Treatment System

1

Raw water tank

The first equipment of the system for the   original water tank, built-in stainless steel float valve and imported water   level sensor to maintain the water tank normal water level. The equipment to   prevent the water supply instability and affect the normal operation of the   system, while avoiding the direct extraction of pipe water caused by the flow   and pressure instability

201/304 stainless steel or PE material

2

Raw water pump

In order to ensure the system of water   flow and pressure rating and set

304 stainless steel

2

Quartz sand

The equipment is mainly used to filter   the solid matter in water, the filter medium is generally used quartz sand.   With high strength, long life and stability of water quality and other   characteristics. Is a reverse osmosis, electrodialysis, ion exchange   indispensable pretreatment equipment

304 Stainless steel;FRP; A3 carbon steel   material to do anti-corrosion treatment, epoxy or lined with rubber treatment

3

Active carbon filter

Activated carbon is widely used in   industrial water treatment equipment, its main role for purification,   dechlorination, to smelly. As the specific surface area of activated carbon   is large, its surface is full of the average of 20-30 Å of the pores, so   activated carbon has a high adsorption capacity. In addition, the activated   carbon on the surface of a large number of hydroxyl and carboxyl and other   functional groups, can be a variety of properties of organic matter   adsorption, and electrostatic attraction, therefore, activated carbon can   also remove harmful humic acid, rich acid, wood yellow Acid and other organic   matter. Usually able to remove 60% -80% of the colloidal material; 47% -60%   of the organic matter

304 Stainless steel;FRP; A3 carbon steel   material to do anti-corrosion treatment, epoxy or lined with rubber treatment

4

Water soften filter

Ion exchange softening device is the most   commonly used in water treatment equipment, its role is to remove the   formation of scale water in hard water calcium and magnesium ions. In many   cases, the use of softened water equipment can remove soluble ions (iron ions).   Standard soft water equipment has four main parts: resin column, resin, salt   device, valve controller

304 Stainless steel;FRP; A3 carbon steel   material to do anti-corrosion treatment, epoxy or lined with rubber treatment

5

Security filter

The main purpose of this equipment is to   carry out the third stage of filtration of the reverse osmosis system with   the aim of reducing or eliminating the last protective effect of the filter   particles leaking from the pretreatment equipment to ensure that the final   entry into the reverse osmosis system meets the requirements

304 stainless steel

6

High pressure

In order to ensure the system of water   flow and pressure rating and set

304 stainless steel

7

RO system

The reverse osmosis system in the system   adopts the polyamide composite membrane element (TFC membrane) produced by   the most advanced American Dow Chemical Company as the main component, the   desalination rate of single membrane is =99.5%, the system desalination rate   is 96-98% , And can effectively remove the suspended particles in the water,   organic silica gel, organic matter, bacteria, viruses, pyrogen and other   impurities

8

Pre-treatment is included sand filter ,carbon filter   ,water softener(optional) and security filter

Water production: 0.25T / hour; water quality = 10us / cm; (raw water:   = =300us/cm)

Quality of water: World Health Organization standards for drinking   water reached; the RO membrane salt rejection of 99% or more

External conditions

Power requirements: 380V / 220V; 50Hz; special circumstances can be   produced according to customer requirements

Venue requirements: indoor installation, temperature 5-45 ?.

1.

Pure water   silica sand

2~3yeas  

2.

Pure water   activated carbon

1~2yeas

3.

Pp cartridge   filter

2~3month

4.

RO membrane

2~3yeas