mini bike sprocket

Mini Bike Sprocket

1.Material: 

Q235A C45 35# 15Cr S35C 304 316 etc.

2.Surface Treatment:

Quenching treatment, drawing temper ,Zinc-plated ,Carburizing treatment  , Blackening etc.

3.Application: 

Sprocket can be divided into active theory of sprocket and chain driven, active chain wheel through the form of a spline on the engine output shaft ;Driven chain theory in mechanical equipment on the driving wheel, through the chain transfer power to the drive wheels, general active chain wheel is smaller than the driven chain theory, can play a slow increase torsion effect .Mainly used in conveying machinery, mining machinery, mining machinery, construction machinery transmission equipment.

4. Processing equipment: 

Hobbing machine, slotting machine , CNC lathes and other equipment.

5.Sprocket models: 

Contains non-standard sprocket (custom) according to customer's drawings, standard sprocket (American standard and metric).

6.Package: 

Wooden Case/Container and pallet, or made-to-order.

7.Introduction 

A high speed chain that is comparable to a motorcycle should be used in combination with an oil bath. For modern motorcycles, this is impossible, and most motorcycle chains are unprotected. As a result, motorcycle chains tend to wear very quickly compared to other applications. They suffer extreme forces, exposed to rain, dirt, sand, and road salt.

Sprockets have various designs, each with the maximum efficiency required by its originator. Sprockets are usually without flanges. A number of sprockets used with the timing belt have flanges to keep the belt centered. Sprockets and chains are also used for power transmission from one shaft to another, in which slippage is not allowed and sprocket chains are used instead of belts or ropes and sprockets instead of pulleys. They can run at high speeds, and some forms of chains are constructed to be silent even at high speeds.