drag chain sprocket

Drag Chain Sprocket

1.Material: 

C45 Q235A 15# 35# 15Cr S35C 304 316 nylon etc.

2.Surface Treatment:

Blackening ,Zinc-plated ,Carburizing treatment  , Quenching treatment, drawing temper etc.

3.Application: 

Sprocket drive transmission should be in the process of production operation, has many characteristics, such as turning flexible and scalable .

4. Processing equipment: 

Hobbing machine, slotting machine , CNC lathes and other equipment.

5.Sprocket models: 

Contains non-standard sprocket (custom) according to customer's drawings, standard sprocket (American standard and metric).

6.Package: 

Wooden Case/Container and pallet, or made-to-order.

7.Introduction 

A simpler type chain can still be used if the chain is not used in high wear applications (for example, if only the movement of the manual lever is passed to the control shaft on the machine or to the sliding door on the oven). Conversely, the chain may be "worn" if additional strength is required, but a smooth drive requiring smaller spacing is needed". Not in the chain on the outside only two rows of plates, there can be three ("double"), four ("three") or more rows of parallel plates, each adjacent with bushing and roll on the same line, and run parallel to the sprocket wheel, the number of teeth. For example, a sequential chain on an automobile engine usually has a multi row plate called a harness.