140m IR LED S-SD8PX-IR

Min Order

1
Product Unit

Pieces
Origin

China Mainland
Payment
Contact Now Start Order

Description

Product Detail

Please strictly follow the below instructions when install this product!

1. Description
• POE power to IR LED & Camera, heater
• Accurate constant circuit drive develops excellent performance of LED; Using high power LED, high efficacy and long service life;
• Fill light for night vision camera
• Indoor/outdoor use
• Easy installation

2. Specification

Quantity of LED	8PCS 2W High Power LED
Wavelength	850nm
Beam angle	15°- 90°
IR Distance	140m-40m(850nm)
Day/night switch	Auto
Working Voltage	IEEE 802.3af PoE
Power consumption	30W (power of LED, blower and IP camera)
Cable	Cat.5e 45cm(1.4 ft.)
Panel	Tempered glass panel
Housing	Aluminum Die Casting Housing
Bracket	Mount bracket
Working temperatures	-30? to +50?(-50? to +50? with heater)
Protection Level	IP65
Color	White
N.W	4KG
G.W	4.5KG
Packing dimension	540265225mm
Bracket (options)	Material: Aluminium Alloy Size: 3609090mm N.W./G.W.: 0.4kg/0.7kg

3. Installation
1. The product includes fragile parts. Take care on every transportation steps and hold carefully, do not stress!
2. Ensure operating voltage and current are proper before installation.
3. Install the product on the holder by fixing the mount hold with screws directly.
4. Adjust the angle of product by loosing screws on bracket.
5. Link power wires tightly and make it waterproof to avoid electric shock.
6. Connect with extra power wire should make it waterproof at the same.
7. The outlet of power wire should be installed downward.
8. Don't use against any fire precaution rules during operation.
9. Installation requested professional operation and qualified personnel.
10. Connect our sales person if you need additional parts for installation.

Maintenance
1. Cut off power before maintenance.
2. Clean the glass regular to get better transmission of light.
3. Clean the housing to get well heat dissipation performance.
4. Clean by dry dishcloth, don't use water or strong corrosive solution.

Night vision pictures


Night time with IR Camera Housing	Night time without IR Camera Housing

4. Installation and adjustment

(1). Internal Picture

4.1.png

2. Installation
A. Put on the camera on the lift and tilt, adjust the height of camera and fix the screws.
B. Connect the power cable of IP camera to Camera Power Supply Port, it’s supplied with DC12V (Default) or AC24V or AC220V optional.
C. Connect the DATA cable of IP camera to the DATA Port.
D. Connect the PoE Input Port to PoE power supply.
E. If the IP Camera has only one cable for both PoE/DATA, then connect it to another PoE power supply.
F. APU Input DC41-57V is to in case that no PoE power supply is available; power this housing with DC41-57V power can turn it on.

(3). Dimension of inside camera

4.3.png

4.3-1.png

5. Dimension

6. Models for selection

Model	Beam Angle	White Light Distance
S-SD8PX-15-IR	15°	140m
S-SD8PX-30-IR	30°	100m
S-SD8PX-45-IR	45°	80m
S-SD8PX-60-IR	60°	70m
S-SD8PX-90-IR	90°	40m
S-SD8PX-120-IR	120°	25m
* White light distance is tested by SONY 1/3" CCD Camera. To achieve the distance needed, please pay attention to your camera specification and lens before purchase. It is normal phenomenon that distance may vary due to different cameras and lens.

Our product is weatherproof and dustproof. Do not modify the shape, dismantle or reconfigure the product, any inflow of water cause by which are not be responsible for warranty repair.

Send your message to this supplier

To:

Shantou Scene Electronics Co.,Ltd

* Content:

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity: