Laser Cavity

Shenzhen MG Technology Co.,Ltd is one of the leading China laser cavity manufacturers and suppliers, equipped with professional factory we are always able to produce low price laser cavity, external cavity diode laser, external cavity laser with reliable quality.

Laser cavity component:

1. Stainless steel or non metal cavity (Golden Cavity);

2. Gold-plated reflector or imported ceramic (ceramic reflector, diffuse anti body);

3. Filter UV quartz glass tube (diversion pipe) and the relevant joint;

4. Laser crystal rod and water sealing part for pump light.

Remarks: 

Laser cavity is made up of two parts: the upper cavity and the lower cavity body. Each part can be independent body, free to open or cover. When fix or replace lamps, just opened the upper cavity, without removing the whole pump cavity, without re-adjusting; same when fix crystal rod, it is convenient installation, easy to adjust the body's position. 

The geometrical parameters of the reflecting surface of the light collecting cavity are close to the theoretical value, the mirror golden plating system is uniform, concentration effect is good, conversion rate is high. 

Adopted dry cavity design, golden plated reflective surface is not in contact with water, life time longer. Can effectively protect the crystal rod and extend the life of it, the cooling effect is good, maximum diameter of the crystal rod can reach 16mm, maximum diameter of the glass lamp can reach 14mm, which can effectively increase the water flow rate.

Daily using, must pay attention to avoid the water drop on golden plated reflective surface, otherwise the surface will be discoloration and corrosion. If happen, dry with lens cleaning paper, later can be put into use. Ensure the water quality and protect the water unobstructed, to prevent the pollution of the cavity led to the decline in power. Attention the antifreeze in cold weather, prevent ultraviolet tube cracking.