40W CO2 Laser Engraving Machine Power Supply

Min Order

1
Product Unit

Pieces
Origin

China Mainland
Payment
Contact Now Start Order

Description

Product Detail

Basic Info.

Package:Standard Export Box	Trademark:Taishun
Origin:Shenzhen, China	Input Voltage:AC220V or AC110V
AC Frequency:47- 440Hz	Cold Surge Current:<=60A(AC220V Input) ≤ 30A(AC110 Input)
Current Leakage:<=0.7mA(AC220V Input)≤ 0.4mA(AC110V Input)	Output Maximum Input Voltage:DC 25kv
Maximum Output Current:DC 20mA	Efficiency:90% (Full Load)
Mean Time Between Failure (Mtbf):>10000h	Response Speed:<=1ms
Dimension:LWH=16714497(mm)

Product Description

Main Feaures

1) Good compatibility: It can be applicable to 70w 60w 50w and 40W laser tube.

2) Fast response speed and effect.

3) Dramatically lengthen the life of laser.

4) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.

5) Easy control of laser power: Both 0~5V analog signal and PWM signal can control the laser power.

6) The power supply has open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.

7) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.

8) The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power.

9) Application: acrylic sculpture, cut; fabric sculpture, cut; rubber sheet sculpture, cut, etc.

Specification

Input Voltage	Input Voltage	AC220V or AC110V
	AC Frequency	47-440Hz
	Cold surge current	≤60A(AC220V input)	≤30A(AC110V input)
	Leak current	≤0.7mA(AC220 input)	≤0.4mA(AC220V input
Output	Max output Voltage	DC 35KV
	Max Output current	DC 24mA
Efficiency	when≤92%load down
Time no-failure	≤10000hours
Response speed	≤1ms(the time from output of switch signal to 90%of initial setting current)
Control port	TLL electricity level switch control, valid electricity has high/low level choices
Volage-resisting	Input-Output ,input-machine hull: 1500V 10mA 60s AC output cathode and machine hull connection
Protection	Can be used an opening way in a short time(request the outer shell be good to connect the ground avoid arcing between anode and machine hull connection in the machine)
Usage environment	Work temperature:(-10-40)°C.Relative humidity:≤90%
Cooling Type	The compulsive air cooling
size	L×W×H=207×144×97(mm)
Weight	3kg