Industrial Chiller

Industrial chiller typical as the complete closed-loop system packaging, including chiller,condenser and circulating pump, expansion valve, no current off, internal cold water tank, a temperature control station. Internal tank helps to keep the cold water temperature and prevent the occurrence of the peak temperature. Closed loopindustrial chillers recirculation at constant temperature and pressure, increase the stability and repeatability of the water cooling equipment and instrument cleaning agent and condition of addititives or clean water. The flow of water cooling to the application point of use and back. If water temperature difference between inlet, the high externalwater tank, so big will be used for the storage of cold water. In this case, no cooling water from the application of cooler directly, but also deep into the external water tankas a "temperature buffer sorting behavior. The cold water tank is much larger than theinternal water tank. The cold water from the application of the external fuel tank and return hot water from the time of the application can be traced back to the external fuel tank, but not on the unit. Less common open-loop control of industrial refrigeration in an open tank or the oil pan it continuously circulating liquid temperature. The liquid is from the tank, through the pump unit, return to the tank. An adjustable thermostat senses thecosmetic liquid temperature, cycle cooler, to maintain constant temperature tank. In one of the new development of industrial water chiller is air cooling, instead of cooling water use. In this case, no hot air cooling condenser and refrigerant, but used by the water cooling tower. This development allowed more than 15%, and allowed in the coolerbecause of the small size of the surface water greatly reduce energy demand, the condenser and the fan case. In addition, the fans allowed under the noise levelsignificantly reduced. Most industrial water chiller refrigeration cooling media, such as air or water but some rely on simple technology includes cooling coil flow regulating temperature. Water is the most commonly used coolant in the freezing process,although the cooling mixture (mainly with the coolant additives, to strengthen the heat radiation water) often use.