Controlled Atmosphere Oven
-
Min Order
1
-
Product Unit
Pieces
-
Origin
China Mainland
-
Payment
- Contact Now Start Order
- Favorites Share
- Description
Product Detail
Product structure:
1. be made of thermosensitive materials, the temperature can reach 200?,300? and 400?
2. the internal bladder uses anticorrosion stainless steel material and it is polished inside, the four corners are smooth
3. there is no contact between the inner and outer shell so that the heat diffusion can be effectively reduced
4. the glass cotton is warm, the surface temperature is low and the temperature is fixed
5. the door of the oven is made of thick glass
6 . the door and the box are sealed with a silicone rubber washer
7. all the isolating materials and gaskets are free of carcinogens
8. open the door on the right side
Control system:
1.air motor: 0.75KW/one air motor
2.wind wheel: 10.5 inch multi wings stainless steel wind wheel
3.heating pipe: using SUS304 stainless steel U heat pipe produced in Taiwan, with heat sink, which can make
the heat pipe temperature evenly distributed.
4.control electric box: the right side of the box is equipped with a control electric box, with a face type nitrogen
gas flow meter and anitrogen concentration analyzer on the panel.
5.the way of air heating: from the oven inlet to the heating pipe, the air is heated and circulated in the oven and
the exhaust gas is discharged from the exhaust port
6.over temperature protection thermostat: using Yudian type temperature controller, PV and SV double LED
display function. When the temperature exceeds the overheat protection thermostat setting, automatic power will be cut off.
7.heating pipe control: using SSR solid state relay to control each group of heat pipe
8.temperature sensor: OMRON 3 meter standard type, K-type thermocouple
9.other: the control electric appliances all use the Schneider brand
Oven functions:
1.automatic constant temperature: the temperature controller can automatically calculate the output power by
PID based on the user’s temperature value settings. When the temperature is closer to the set point, the
smaller the output power is, so as to achieve the purpose of constant temperature control and save energy.
2.timing function: timing is divided into 2 files (manual / automatic): when selecting manual, it starts to start
timing at once; when selecting automatic, it starts time when the temperature must reach the temperature
value setting. Acousto-optic alarm would alarm and stop automatically when the time meets the requirements.
3.over-temperature alarm: when the actual detection temperature exceeds the set value of the super-
temperature protection temperature controller, the heating power supply will be cut off automatically.
4.acousto-optic alarm: alarm lights with buzzer
5.grounding protection: safety grounding protection of structural parts
6.power supply phase, phase sequence protection: be equipped with phase sequence protector, to avoid these
situations when reconnect the power :motor reverse, no strong wind, the power supply phase.
- SJ738-type Series Rapier 1 Pieces / (Min. Order)
- SJ758-type Series Rapier 1 Pieces / (Min. Order)
- Smart Spreader 1 Pieces / (Min. Order)
- ATV Seeder Spreader 1 Pieces / (Min. Order)
- Cdr Spreader 1 Pieces / (Min. Order)
- Salt Spreader 1 Pieces / (Min. Order)
- Cell Phone Battery Spot Welder 1 Pieces / (Min. Order)
- Super Spreader 1 Pieces / (Min. Order)
- Soft Tooth Spur Gear Reducer 1 Pieces / (Min. Order)
- SG-W15 Concrete Standard Curing Box 1 Pieces / (Min. Order)
- GD-7000A Sprayer 1 Pieces / (Min. Order)
- GD-7000B Sprayer 1 Pieces / (Min. Order)
- GD-7000E Sprayer 1 Pieces / (Min. Order)
- GD-1150 Sprayer 1 Pieces / (Min. Order)
- Chipping Spreader 1 Pieces / (Min. Order)
- Synchronous Chip Spreader 1 Pieces / (Min. Order)
- Corflute Signage 1 Pieces / (Min. Order)
- UHF Desktop Reader 1 Pieces / (Min. Order)