Carbon Steel Hydrocyclone Desander

Product description of carbon steel hydrocyclone desander

  Carbon steel hydrocyclone desander is carried out by using the principle of centrifugal separation of desanding. Since the inlet pipe is installed in the eccentric position of the tube, when the water passes through the inlet pipe of the cyclone desander, first the circular tangential direction of the cylinder will form a circular flow downwards down the circumference of the fluid, and the flow of water rotates downward, when the water reaches a certain part of the vertebral body, it turns upwards along the tube axis, and finally discharge through the outlet pipe. Under the action of the centrifugal force of the fluid and its own gravity, the sand particles fall into the conical slag bucket on the lower part of the device. when accumulated in slag in the grains of sand to a certain extent, only need to open the manual butterfly valve, clutter can be under the effect of water flow cyclone desander. There are components on the lower part of the vertebral body to prevents the sand from rising up, when the sand accumulation in the slag bucket reaches a certain extent, only by opening the manual butterfly valve, the sundries can flow out of the cyclone desander under the effect of water flow. Therefore, the desander does not need to install the front and rear valve and bypass valve, so the cyclone desander is relatively economical in floor area and initial investment.

Carbon steel hydrocyclone desander is a kind of sand removal device which is very efficient in removing sand and feculence clearing, corresponding to the average capacity of 1.8g/cm rust, sediment and other impurities, its separation particle size is 0.07 mm. When the particle size is 0.3mm, the decontamination efficiency can reach 97%.

  Carbon steel hydrocyclone desander can clean dity in the operation, that is, do not need to turn off the pump. In the decontamination, the butterfly valve opens slowly, the first outflow is sewage, then the turbid water, and finally is the clean water. Clean the butterfly valve body liner while the water is flowing out. Therefore, the butterfly valve will not leak after closing.

Model specification of carbon steel hydrocyclone desander

*The standard of the above standard of DN125 is equipped with the storage sand chamber. If the other models need to be increased, please make another statement with the business personnel when ordering.

Features of carbon steel hydrocyclone desander

1. Classification for section I closed circuit grinding

2. Classification for section II closed circuit grinding

3. Regrinding for fine mine classification

4. Mud-removing before selection and after selection

5. Dam and backfill for gangue

Technical parameter of carbon steel hydrocyclone desander

1.    Raw water turbidity=300                 2.Head loss2mm

3.Turbidity of treated water=10              4.Feed water pressure=0.2-0.25Mpa

5.Material:Low carbon steel                 6.Desand diameter=0.1mm

7.Working temperature:normal temperature

Details of carbon steel hydrocyclone desander

Patent

Packing and Shipping 

Company introduction 

Shandong Qianwei Environmental Protection Equipment Co., Ltd is located in a beautiful coastal city-Weihai, is a modern technological enterprise covering technology research and development, design, manufacturing, sales and services. The main business: auxiliary electric heater, comprehensive hydrotreater, fully automatic water softener, cyclone desander, constant pressure water supply equipment, plate heat exchanger,ect. central air-conditioning room equipment.

Our company has a complete set of quality management system, strictly follow the ISO9001:2000 international quality system and have a full set of product testing equipment and professional technicians, the product quality is stable and reliable, our company adhere to the good faith forever, give consideration to good service and win-win principle, actively carry out exchange and cooperation with large central air conditioning manufacturer and dealers from domestic and overseas. With strong technical economic strength and continuous pioneering spirit, provide the most advanced technology equipment and the most satisfactory service to our users.

Our company combines the development concept with strict, study and research, carefully designed and crafted; ‘‘quality first, reputation first, customer first’’ is our business purpose. We will continue to forge ahead and persist in scientific and technological innovation. It’s our unremitting pursuit to provide high-quality products to customers wholeheartedly.

Enterprise Mission: to help enterprise grow, realize employee’s dreams, revitalize the national economy.

Enterprise Vision: we will build a well-known brand in the filed of central air-conditioning equipment.

Enterprise Idea: profession, brand, service, win-win.

Team Idea: credibility, unity, efficient, innovation.

FAQ

1. Are you a manufacturer, trading company or a third party?

We are a manufacturer, and we have built up our company since 2007.

2. May i know which payment will be accepted by your company?

So far 100%T/T before shipment, and 30% deposit paid by T/T, balance paid by L/C are available.

3.Do you have design team?

We have a professional design team provide drawings, we wait for your confirmation and production

4.Do you have certificates?

Yes , we have ISO certificate and certificate of patent

5.Can the products be customized?

Yes, we provide OEM and ODM service, so just feel free to tell us your detail requirements.

6.How can i trust your company?

With 10-years-professional design, we can provide you suitable suggestion and lowest price. 

Contact us 

Please feel free to send us your detailed requirements, you would be satisfied with our service.

Contact Below: