150W E40 LED Street Light

E40 led street light-150W

1) Product Descriptions

    1.Use 1 watt high brightness LED as a light source, constant current drive technology, provides a stable output current, ensure the LED life,we can do white, natural white, warm white color temperature, E27, E40 lamp holder available.

2.Working voltage 200V-220V, the shell is made of high-grade aluminum manufacturing, the heat conductivity is high; in general, life is 30000-50000 hours; ambient temperature application range -20 ? ~ 55 ?, ambient temperature within the specified range, light brightness, color, etc. to achieve the best results; easy to install, customers can replace traditional incandescent light, energy-saving lamps directly according to their needs.

2) Test parameters

1. 150W Cool White:   

3) Electrical Specifications

1.1  (Rated output )

       Notes :  Ripple Voltage is measured with oscilloscope with bandwidth 20MHz . A

47uF E-cap and 0.1uF ceramic-cap shall be connected to the onnector in parallel.

1.2  (DC Output Overshoot At Turn On & Turn Off)

Note:  All of dc output current from Min. to Max..

1.3  (Time between AC input and 10%DC output )

1.4  (DC output voltage rise time)

Note: The output voltages shall rise from10% to 90% of their output voltage.

 1.5  (DC output voltage fall time)

Note: The output voltages shall fall from90% to 10% of their output voltage.

4) Reliability

The MTBF of the charger shall be 50000 hours minimum while operated at 25^°C ambient, 100-220Vac input line voltage and maximum output current and voltage .

5) Power cycle work test

   In the normal input voltage, maximum use of the work load, the power at an ambient temperature of 50 ? - 10 ? negative cycle work between -50 ?. Operation is as follows:

1) the power in ambient temperature of 50 ? environment, work 12 hours.

2) the power to stop work and put in four hours at room temperature to cool.

3) plug the power into the environment at -10 ?, working 12 hours.

4) the power to stop work, and put into a cooled at room temperature for 4 hours.

5) the power in ambient temperature of 50 ? environment, work 12 hours.

6) Environmental Characteristics

1.1 Climatic conditions specifications

Operating temperature      : -10? ~ 50?

Operating humidity    : 0% ~98% (Non-condensing)

Operation Altitude     : to 10,000ft.

Storage Temperature        : -30? ~80?

Storage Humidity             : 0% ~98% (Non-condensing)

Storage Altitude       : to 20,000ft. 

Cooling Method       :Convection or Forced air

7) Precautions

1. Before powering make sure the operating voltage is correct, misconnection voltage can cause permanent damage to the lamp.

2. The initial budget for the required number of lamps, then according to the number of single lamp rated power, calculate the total power, and then design distribution scheme.

3. Do not touch the bottom after power lamps with any part of the body of the metal part, or there will be danger of electric shock.

4. Before unpacking, please confirm the lamp has not damaged during transport, if so, please notify your supplier for replacement.

5. In order to ensure the integrity of the state and the use of security products, please follow the instructions on the instructions and reminders.

6. Ensure that the installation location before installation can withstand 10 times the weight of the product; installed in no vibration, no swing, no fire hazards flat place.

7. When the lights work, light body shell temperature may be as high as 55 ?, should let lamps far away from equipment sensitive to temperature.

8. Lamps as semiconductor lighting products, particularly sensitive to the ambient temperature, ambient temperature is above 55 ? its life will be shortened, it should let lamps far away from heat sources, keep the ventilation work environment; and the lights work environment temperature is maintained at 0 ? ~ 25 ?, its light source life can be effectively guaranteed.

9. Do not use a short pass off frequently, otherwise the fixtures easily burned.

Product Size:?146*305mm                 Products package