VF-1.5/150 Fixed Electric High Pressure Air Compressor

VF-1.5/150 fixed electric high pressure air compressor

Main structure of compressor

Crankcase parts:

Crankshaft box sides has for demolition and check with of side cover and depending on oil window, Qian paragraph both power link end with bearing seat and Qian bearing cover, Hou bearing cover upper of fan bracket support with fan parts: upper cast has mutual into 45 degrees of cylinder support plane, top surface with breathing device: crankshaft box bottom with oil end of shell, oil end of shell within sheng has dedicated of compressor oil.

The crankshaft, connecting rods and parts

Crankshaft crank install link, both ends of the crankshaft bearing, crankshaft big end flywheel with elastic coupling linked: small end near the bearing pulley driven cooling fan is spinning. Connecting rod crankshaft lubrication is Polish Rod splash and pump the oil to the crankshaft and pistons and other parts lubricated.

Piston parts:

A grade I, grade II or grade or category IV piston parts, level the piston for cast aluminum alloy, two-stage piston for cast iron, or category IV for cast aluminum alloy. Piston piston rings, oil scraper ring and piston pin hole stagger above 60 degrees, each piston ring staggered installation 120 degree.

Cylinder components:

First grade, second grade, category IV cylinder parts, cylinder head surface has cooled up to increase heat dissipation, valve parts, pressure cylinder within cylinder head and capping.

Exhaust valve parts:

Level of intake valves, primary and secondary intake valve exhaust valve, two exhaust valves, ring valve, spring support ring on the valve seat valve, valves and springs are made of high quality steel, and category IV is a combination intake and exhaust valves.

Cooler and fan Assembly:

II, or category IV cooler and the cooling fan into two parts. Connected to the compressor for single, double, three-level between the intake and exhaust. Based on installed on the base and the cooler upper fitted with safety valves, bottom drain valve, crankcase ends-oriented cover and protective cover, fitted with a wind-cooling fan in the Middle, there is the fan part of the fan bracket installed on the crankcase, passed by the end of the crankcase crankshaft pulley v-belt drive fans are spinning.

Instrument control system

On the dashboard with one or two, or category IV pressure tables, compressor, hydraulic oil temperature gauge.

Automatic alarm high compressor discharge pressure is down.

Compressor oil pressure alarm stop automatically at the end of it.

Electromagnetic pollution.

Lubrication system: air compressor with double splash and oil pump lubrication, oil splash all over the case, and the formation of oil mist, bearings, and piston, piston rings, such as moving parts well lubricated.