T40 Axial Fan

I. Product Overview

 T40 axial fan can be used as general factory, warehouse, office, residential heating ventilation or enhance heat dissipation purposes. If the cabinet to remove the fan can be used freely. Can also be a longer interval of the exhaust duct installed in series, to increase the pressure in the pipeline.

 Second, product characteristics

 1, T40 axial fan impeller diameter from small to large total of 10 models, in order of priority 2.5 #, 3 #, 3.5 #, 4 # 5 # 6 # 7 # 8, # 9, # 10 and so on, each of the blades can be installed into a machine number 150,200,300,350 five kinds of angles.

 2, T-40 main axial fan impeller, housing, collector and motor and other components, the impeller and motor directly connected to the steering wheel L (motor end).

 Third, the product process

 1. Impeller: Baosteel produced blades made from high quality Q235 steel, metal cutting, hydraulic molding. Wheel Baosteel produced from high quality Q235 steel, hydraulic machine stretch forming. Leaves by special welding equipment welding protection of carbon dioxide gas. And by the significant number of hard-bearing balancing machine calibration, balancing accuracy G4.6 level and above.

 2, Hair Dryers: Baosteel produced from high quality steel with Q235 cutting shears, with three core Bending rounded, carbon dioxide gas welding. Spinning spinning machine, beading machine spinning and then the two arc-shaped ribs on the barrel. Guarantee duct has sufficient strength, stiffness, elegant appearance.

 3, the safety net: fan with a galvanized protective grille.

 4. Assembly: After the fan assembly, X, Y, Z axis vibration velocity is less than 5.6mm / s.