New!!!china Supplier Chemical Industries Pulse Air Stream Dryer First-class Quality

Min Order

1
Product Unit

Pieces
Origin

China Mainland
Payment
Contact Now Start Order

Description

Product Detail

If you want to contact with one of the leading steam dryer manufacturers and suppliers in China, equipped with one productive steam dryers, air syeam dryers factory, Wuxi Sundry Engineering Co.,Ltd is always at your service.

dryer Introduction

Steam dryer is worked in solid fluidization, this drying makes hot air to contact directly with the materials, can make the materials to be dried in hot air, therefore the materials surface contact become much larger, the heat and quality transfer becomes more effective.

dryer Features

1, evaporation of water capacity from 50kg / h-1500kg / h, but small volume of equipment investment;

2, full-flow drying material carried in the pipeline, the drying time is very short (only 0.5-2 seconds) and the product is not in contact with the outside, little pollution, good quality;

3, The basic model consists of air filter, heater, feeder, drying pipe, fan and cyclone components. Users can purchase filters or other auxiliary equipment required.

Dryer Principle

Material into drying tube bottom from the feeder, upward moving by hot air blown, hot air and materials fully contact in an upward and spiral motion, heat exchange, to reach achieve drying. The dried product were sent from the drying tube top by cyclone, and the exhaust gas into the atmosphere through the exhaust pipe.

Technical Parameter

Model	Evaporated moisture( kg/h)	Power(KW)	Covered Area(m2)	Equipment Height (m)
QG50	50	7	16	9
QG100	100	13	26	11
QG200	200	21	35	11
QG250	250	24	51	13
QG500	500	43	78	13
QG1000	1000	100	105	15
QG1500	1500	150	120	16

* If any change in the above table, subject shall prevail without notice

*The table cannot include all products, please contact with our sales engineering for more information

Dryer Application

Vinyl acetate and vinyl chloride copolymer, cellulose acetate flocs, catalyst, calcined gypsum, electrolytic manganese dioxide, zeolite, diatomaceous earth, silica catalyst, bone meal, potassium sulfoammonium filtered drugs, synthetic resins, active gluten, Tien of clay, chemical cake, rutile titanium dioxide, copper sulfate, aluminum sulfate, calcium phosphate, starch phosphate, barium hydroxide, calcium citrate, dyes, coal, clay, clay, cement, aluminum hydroxide, barium, calcium lactate, food, cyanuric acid, gypsum slurry, lime, biological products, carbon black, calcium carbonate slurry, sludge residue, organic chemicals, aluminum stearate, ferric oxide, organic fuel, corn gluten feed, mica powder, pharmaceuticals, pigments, lees residue and so on

Typical case

Dry material: aluminum hydroxide

Material Shape: Powder

Moisture content: 25%

Prpduct Moisture: 4%

Inlet air temperature: 190

Outlet temperature: 90

Heating: gas heating Direct