Spheric Lens
-
Min Order
1
-
Product Unit
Pieces
-
Origin
China Mainland
-
Payment
- Contact Now Start Order
- Favorites Share
- Description
Product Detail
Quick Details
Place of Origin | Danyang, Jiangsu, China (Mainland) |
Brand Name | Just |
Model Number | spheric lens |
Quality Grade | A or B Grade |
Lens Material | Resin |
Vision Effect | Single Vision |
Coating | HMC |
Coating Color | Green/Blue/Magenta |
Lens Color | Clear |
Reflective Index | 1.56 |
Abbe Value | 34 |
Diameter | 72MM for minus/minus power |
Gravity | 1.28 |
Design | Spheric |
Certification | CE/FDA/ISO9001 |
Finished Spheric Power Range
MINUS 72MM: -0.00 ~ -6.00/-0.00 ~ -2.00
-6.25 ~ -10.00/-0.00 ~ -2.00
-0.00 ~ -6.00/-2.25 ~ -4.00
PLUS 65MM: +0.25 ~ +6.00/-0.00 ~ -2.00
Flowchart
Step:
1.Ingredients : ready the material of lens and mix according to formula , (formula is a secret )
2.Filling in model and first curing : filling the monomer into model , then put into curing machine , after some hours with high temperature , it will be solid
3.Open model : use machine to open model , and take out lens , the model is recycle , can be used many time until broke
4.Cutting lens edge : the original lens edge is not smooth , so have to cut with specific knife
5.Clean len : after cutting , will much dusty , so have to clean with specific water and liquid
6.The first checking : when there is no dusty on lens , will do the first checking , elect the good lens to do next step , the bad one will be threw away
7.Clip and clean lens : clip the good lens with tool and do one more time cleaning ,
8.HC coating : put the cleaning lens into HC machine , there are a lot specific liquid , have to be in one by one ,
9.second curing : after HC , will have to go to another curing machine , after high temperature , the specific liquid will be on surface stable , it will protect lens from scratch
10. The third checking : checking again , due to maybe have some liquid dots on it , it can not be moved ,so have to check and elect ,
11.HMC coating : once finish HC , will go to do HMC , it will refective bad ultraviolet ligth and reduce scratch
12. The fourth checking : after HMC ,we have to check to make sure the coating is ok , if not ok , will have to redo or threw away
13.The blank Package and store in warehouse : for factory , we put lens into blank envelope with power , then keep in warehouse ,
14. The fifth checking and Packing with clients’ envelope before shipment : once get order from customers , we will elect lens from warehouse , check quality and replace evelope , after these step ,will can send out.
- 2-Phenyl Phenol 1 Pieces / (Min. Order)
- Others 1 Pieces / (Min. Order)
- Other PCB 1 Pieces / (Min. Order)
- F-Theta Lens 1 Pieces / (Min. Order)
- Others 1 Pieces / (Min. Order)
- Others 1 Pieces / (Min. Order)
- Others 1 Pieces / (Min. Order)
- Others 1 Pieces / (Min. Order)
- Others 1 Pieces / (Min. Order)
- Aspheric Lens 1 Pieces / (Min. Order)