SolverPI-Resin 6002

  • Description
Product Detail

 Product Name: Thermoplastic Polyimide Resin

Item No.: SolverPI-Resin 6002

 

SolverPI-Resin 6002 is produced by  SOLVER POLYIMIDE which has good machinability. It can be mould pressing,injection molding, extrusion molding.The themoplastic polymide can be reprocessed and mixed with graphite,carbon black,fiberglass,ceramic powder,carbon fiber,aramid fiber,metal powder,molybdenum disulfide,invisible material and so on to change its characters,producing the bearing,valve,seal part,pipe panel all kinds of mechine parts,and invisible marterial.

 

The characteristic of SolverPI-Resin 6002

·High heat resistence.Can be long-uesd in temperature>300?.

·Excellent lubricity.Low COFand low frictional loss.

·High insulation,low Coefficient of Linear Thermal Expansion,deformation resistence,acid and alkalicresistence,salt tolerance,non-corroding.

·Radiation resistant.N appearance change under the 200kGyirradiatiin of ray.

Extremely low hydroscopicity.Resistence to water wapor,no hydrolysis.

·Low thermalconductivity.Good thermal insulation properties,low calorific value when it runs up.

·The low dielectyic constant.High impedance,no reflection to radar,good base material of invisible material.

·Fire retardant level FV-level 0.


 

The applied range of SolverPI-Resin 6002

   With the superior property,the ZTS-PI-I can be used in petrochemical industry,mining machinery,precision machinery,automobile industry,micro-electronic device,medical apparatus and instruments,aviation,aerospace,guided missile,naval vessels and so on.

In high speed and high pressure applications,parts with low COF and abrasion resistence.

Parts with good creep resistence and low plastic deformation.

Parts with good self-lubricating and good lubrication performance.

Parts with high bending?stretching?striking properties

Parts with high fire retardant level(no metal)

Parts with wave-transparent?microwave absorpting?invisible properties.


 

The permance index of SolverPI-Resin 6002

Terms of detection

Guideposts

Test standard and methods

Density(g/cm³)

1.28-1.32

GB/T1033.1-2008

Bending strength(MPa)(232?)

>850

GB9341-2008

Flexural modulus(MPa)(232?)

  >25000

GB9341-2008

Impact strength Unnotched(KJ/?)(232?)

>45

GB1043-1979

Impact strengrh notch(KJ/?)(232?)

>8

Compressive strength(MPa)(232?)

>950

GB1041-2008

Tensile strength(MPa)(232?)

>700

GB1040-2006

Elongation%

5.0-7.0

GB1040-2006

Rockwell hardness(HRE)

80-100

GB9342-1988

Distortion temperature(18.6kg/?2)?

=300

GB1634-2004

Dilatation coefficient(23-200?),(10?5?/?/?)

3.5-5.5

GB/T2572-2005

Friction coefficient(PV=0.33MPa·m/s)

0.1-0.2

GB3960-1983

Wear volume(cm3)

(1.0-5.0)×10-5

 

GB3960-1983

Dielectric constant(1KHz)

2.0-3.0

GB1409-2006

Surface resistance(O)

1010-1013

GB1410-2006

Volume resistance(O·m)

109-1012

GB1410-2006

Note:When test the sample,you should indicate the model adopted by way of preparation (moulding, extrusion molding) is used in this standard moulding (280-380 ?) preparation of sample

Product appearance:faint yellow powder.

Product specification:powder,granule,proximate matter

Packing:5kg/bag,25kg/drum

 


Send your message to this supplier
To:  

SOLVER POLYIMIDE

* Content:  

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity:  
  
You May Like
Not exactly what you want? One request, multiple quotations Get Quotations Now >>
China Mainland Favorites
Transaction Level:

* Quantity:

You May Like