Semi-automatic Filling Machine

This machine is of simple structure, reliable and less troubles; using cone piston, good sealing performance, filling liquid is accurate, fluid and easy; cerebrospinal fluid are made of stainless steel and facilitates loading and unloading, which can carry out aseptic filling; cylinder, push rod, a piston made of stainless steel, corrosion-resistant, wear-resistant speed is continuously adjustable, easy to operate.

1, after booting the crank does not rotate properly and failure:

Semi-automatic filling machine

A: it is fixed on the rod downwards, push the syringe liquid pipe inside and outside prison, can't bring the crank rotation, unscrew nuts, and will be fixed on the rod after the up right position, the nut spanner.

B: syringe Assembly between the inner and outer tubes do not clean when stuck in prison, required to remove the injectors cleaned.

C: end of the load bearing parts of the injection system. So that it does not work properly, it is necessary to reload.

2, liquid injection is not uniform, joints tightened up and the gas leakage, need to be further tightened.

3, the machine rotate properly, without repacking fluid discharge, failure:

A: foreign objects inside the valve needs cleaning;

B: valves placed within two thimbles errors (both thimble tip facing down, shall not be installed backwards).

C:100, 500ml type, such as the liquid outlet at the lower end of the piston when there is liquid leakage, should open the cylinder replacement of random ring. Note: f 65x3.1 acid and alkali-resistant sealing ring for sealing ring.