Polyken Steel Pipeline Coating Tape

If you are looking for China golden supplier and China good supplier polyken steel pipeline coating tape, good quality and high quality polyken steel pipeline coating tape, please feel free to contact Jining Qiangke Pipe Anticorrosion Materials Co.,Ltd.

System Description

Thepolyken steel pipeline coating tape Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.

The inner-layer tape shall be applied after the primer and before the outer-layer tape by hand or with a wrapping machine

Product features:

The use of ordinary steel in harsh environment, there will be severe corrosion, which will reduce the service life of steel pipe, corrosion resistance and relatively long life, under normal circumstances can be used for 30-50 years, and the installation and use of the correct network can also make maintenance cost reduction, anti-corrosion thermal insulation pipe can also set the alarm fault automatic detection system network, accurate understanding of fault location, and automatic alarm. 3PE anti-corrosion steel pipe coating life is essential to the pipeline, the same material pipeline, some buried in the ground for decades without corrosion, and some years there are leaks. This is because they use different outer coatings.

Features:

Pipeline Anticorrosion Heat shrinkable polyethylene tape is composed of radiation cross-linked polyethylene backing material and special hot melt adhesive material, with shape memory function. After heating,

The hot melt is used to melt the shrinkage into a uniform weld to form a perfectly sealed surface, tightly applied to the shrinkage of the tube or antisepticised parts. Even if there are concave table

Surface or line coating protective materials can also be combined with other materials. Pipeline anti-corrosion polyethylene heat shrinkable tape has good water vapor permeability, chemical resistance and anti-aging and so on. Pipeline anti-corrosion heat shrinkable polyethylene winding has a strong ability to adapt to the environment, can resist mechanical damage, good resistance to liquid pressure, and has a strong anti-bacterial, fungal and chemical corrosion and so on. Easy to install, easy to operate, reliable performance;

Administrative standards:

1 oil and gas industry standard sy 0413-2002 "buried steel pipe polyethylene coating technical standards"

Code for repairing pipeline coating of West - East Gas Pipeline Project

Technical specification for single layer spheroidized epoxy resin powder coating for steel pipelines

4 Buried Steel Pipes Polyethylene Coatings 23257-2009

5, foreign standards: BSEN12068 1999, ISO21809-3-2007 and so on

Structure

Properties

Ordering Information

POLYKEN 980 and 955 tape coatings are in roll form.

Eg.: POLYKEN980-20  BLK  6"×400'