Open Face Paint Booth

Min Order

1
Product Unit

Pieces
Origin

China Mainland
Payment
Contact Now Start Order

Description

Product Detail

Internal Size:	6.9x3.9x2.65m	Components For Control:	Schneider Electric Components
Fan:	Turbo Fan	Heating:	G20 Riello Burner
Wall Panel:	EPS	Light:	LED

Commercial Cabinet Spray Booth Galvanized Steel Roof With Prep Station

Features

1, Spray booth: 7.5KW turbo fan for intake, 7.5KW turbo fan for extraction.

2, Prep station: 5.5KW turbo fan for intake and exhaust.

3. Spray booth with two lines grilles.

4, Spray booth with side light.

5, All LED lights, energy save and more illumination.

6, Color white, blue, orange and red is optional.

7, Down draft.

Advantage:

Special for the bodyshop, continue line if needed, air flow from back side, intake and suction units from complete basement, down draft, two units side by side, option for the electric shutter door between two booth, and rail on the floor, car moveable from one booth to another. Specification as below for one unit only.

Spray booth:

Item	Detailed Specification
Inside dimension	6900×3900×2650 mm (L×W×H)
Outside dimension	7000×5300×3400mm (L×W×H)
Front door	Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, blue colour, door head and two batten on both sides white colour.
Emergency door	1 units, 650×1800mm (W×H), colour: white.
Basement	Galvanized steel assemble, 300mm high, quadrate steel support, two lines grilles made by flat bar and twisted steel.
Wall panel	Thickness: 50mm, width:1150mm, tongue and groove structure, 0.376mm colour steel with EPS inside, colour: white.
Light	Ceiling Lights: 8Units×4Pcs=32Pcs×16W, side lights: 8Units×2Pcs=16Pcs×16W, with LED, lighting boxes are powered coated, illumination =1000LUX
Generator cabinet	Intake from side upper, exhaust from rear upper, galvanized steel frame; blue machine-made panel covered, filled with heat preservation material inside.
Intake and Exhaust system	Inlet:1×7.5KW turbo fan, air capacity for each fan: 25000m³/h.
Intake and Exhaust system	Outlet: 1×7.5KW turbo fan, air capacity for each fan: 25000m³/h. Manual damper, 4m ducts, 1 pcs 900 bend, 1 pcs 300 bend.
Heating system	Riello diesel burner G20, stainless steel heat exchanger, pneumatic damper for baking circulation, heating productive 200000kcal/h.
Purification system	Pre-filter, ceiling filter, fibreglass filter, activated carbon filter.
Roof	Galvanized steel
Control system	Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, temperature controller, power supply switch, emergency stop, hour meter, temperature limiter, all motors is normal start.
Total power	17KW (Power supply 1×220V, 3×380V, 50HZ)

Prep station:

Item	Detailed Specification
Inside dimension	6300×3450×2650 mm (L×W×H)
Outside dimension	7550×3550×3400mm (L×W×H)
Plenum dimension	6300×3450×450 mm (L×W×H)
Room body	Back side EPS wall panel, the other sides PVC curtain.
Light	Ceiling Lights: 8Units×4Pcs=32Pcs×16W, with LED, lighting boxes are powered coated.
Generator cabinet	Exhaust from back side, galvanized steel frame; white machine-made panel covered, filled with heat preservation material inside.
Intake and Exhaust system	1×5.5KW turbo fan, air capacity: 18000m3/h, with electric damper.
Purification system	Pre-filter, ceiling filter, fibreglass filter.
Roof	Galvanized steel
Control system	Fan switch, lighting switch, emergency stop.
Installs way	Supported by steel column.
Total power	6.7KW (Power supply 1×220V, 3×380V, 50HZ)