Car Paint Booth

Min Order

1
Product Unit

Pieces
Origin

China Mainland
Payment
Contact Now Start Order

Description

Product Detail

Internal Size:	6.9x3.9x2.65m	Control Panel:	Schneider
Fan:	Turbo Fan	Heating:	Riello G20 Burner
Ramp:	Inner Ramps	Illumination:	LED Lights

Inner Ramps 6.9M Garage Paint Booth Diesel Burner Heating Energy Saving

Features

1, 7.5KW turbo fan for intake, 7.5KW turbo fan for extraction.

2. All panels are tongue and groove interlock structure.

3, #304 stainless steel heat exchanger.

4, All LED lights, energy save and more illumination.

5, Color white, blue, orange and red is optional.

6, OEM available.

Advantage:

In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the booth which brings clean,

symmetrical and steady-going down airflow for spraying, After painting, hot air goes from heating

generators to plenum, then enters room after filtered by ceiling filter, providing heat that is necessary for baking of cars surface. .

Item	Detailed Specification
Inside dimension	6900×3900×2650 mm (L×W×H)
Outside dimension	7000×5350×3400mm (L×W×H)
Front door	Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, orange colour, door head and two batten on both sides white colour.
Emergency door	1 units, 650×1800mm (W×H), colour: white.
Basement	Galvanized steel assemble, 300mm high, quadrate steel support, central grilles made by flat bar and twisted steel, galvanized, inner ramps.
Wall panel	Thickness: 50mm, width:1150mm, tongue and groove structure, 0.376mm colour steel with EPS inside, colour: white.
Light	Ceiling Lights: 8Units×4Pcs=32Pcs×16W, side lights: 8Units×2Pcs=16Pcs×16W, with LED, lighting boxes are powered coated, illumination =1000LUX
Generator cabinet	Intake from back upper, exhaust from rear upper, galvanized steel frame; orange machine-made panel covered, filled with heat preservation material inside.
Intake and Exhaust system	Inlet:1×7.5KW turbo fan, air capacity for each fan: 25000m³/h.
Intake and Exhaust system	Outlet: 1×7.5KW turbo fan, air capacity for each fan: 25000m³/h. Manual damper, 4m ducts, 1 pcs 900 bend, 1 pcs 300 bend.
Heating system	Italy RIELLO G20 diesel burner, stainless steel heat exchanger, pneumatic damper actuates from spraying to baking cycle. Max. heating productivity: 200000kcal/h, max temperature: 80?, 4pcs chimney, 1 pcs bend.
Purification system	Pre-filter, ceiling filter, fibreglass filter, activated carbon filter.
Roof	Galvanized steel
Control system	Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, all motors is normal start.
Total power	17.5KW (Power supply 1×220V, 3×380V, 50HZ)