Industrial Electric Ceramic Barral Heater Bands For Plastic Piping Machinery

  • Description
Product Detail

Industrial Electric Ceramic Barral Heater Bands for Plastic Piping Machinery


Ceramic Heater Product Introduction:

1. Ceramic band heater consists of stainless steel cover, alloy wire, ceramic block and ceramic fiber insulation. We put the coil alloy wire through special-designed small ceramic block, then cover the stainless steel outside of the heating element. This heater type is widely used in plastic machinery, chemical fiber machinery and so on.


2. Ceramic band heater is a kind of high efficient thermal distribution heater with excellent thermal conductivity and excellent metal alloy. It ensures the uniformity of hot surface temperature and eliminates the hot and cold point of the equipment. It has the advantages of long life, good thermal insulation performance, strong mechanical properties, corrosion resistance and magnetic field. The external heat dissipation surface will be added to the heat preservation device. It can help to save 30% energy.


3. Ceramic band heaters are not made of regular mica, but are made of ceramic strips. Therefore, the power of this product is 0.5 ~ 1.5 times higher than normal. The heating body is made of the imported round silk ceramic to be inserted into the ceramic strip, the outer cover is stainless steel, and the heat insulation and insulation cotton (aluminum silicate fiberboard) is used in the center to prevent the leakage of temperature. Ceramic block is high frequency ceramics which has the characteristics of heat transfer fast, hard and hard to break, high temperature not deformation.


Ceramic Band Heater Performance:

1. Fast heat transfer, uniform heat, stable work.

2. Temperature does not leak, which can help to save energy. The outer cover is not hot to touch with hands and it can work safety.

3. The power of the product is high, and the power of the ceramic strip is 0.5 ~ 1.5 times higher than normal.

4. Ceramic band heatre is with high quality and high temperature resistance wire. It has advantages including heat faster, even heating, high temperature stability and so on. They can be used for a long time in the 500-600 ?.

5. Product life is long. Because the raw materials are aging slowly at high temperature, so the product life is long.

6. Comply with GB technical requirements. Power deviation + 5% to 5%.

7. Electrical strength: Test by voltage 2500v / 50Hz sine ac voltage, there is no breakdown within 1MIN.

8. The connection model can be customized according to users' demand. The voltage can be customized from 36V, 110V, 180V, 220V, 380V. And the maximum power load can reach up to 6.5 W/cm². Compared with the traditional electric heaters, it can reduce energy consumption by 30%.


Ceramic Band Heater Ordering Notice:

1. Ceramic band heater is a kind of heater with high temperature and long life. They can adapt to more and more high demand on working temperature in modern industry, especially chemical fiber, engineering plastics, plastic machinery, electronics, medicine, food and all kinds of heating pipeline, etc.

2. The user shall provide product drawings or samples. If no drawings or samples, they must provide specifications, model, voltage and power of the product.

3. The surface load of ceramic band heater is between 2.5 ~ 6.5W/cm².


Ceramic Band Heater Precautions:

1. Ceramic band heater is not water-proof, so do not contact with oil, water and plastic particles to prevent leakage.

2. The ceramic electric heater must be closely fitted with the heating body, and the surface of the heating body should be flat and complete without bumps.

3. If the surface is found to produce a charred color after use, it indicates that the heat and heat dissipation imbalance. It should be adjusted in time to prevent burning.

4. When using high temperature ceramic electric heaters, the ceramic tile fracture should be avoided by hard hitting or collision with the hard object. The outer surface of alloy resistance wire affects operating life.

5. Before installation, please check whether the installation location is in line with the ceramic heater specifications, and whether the voltage is consistent.


Ceramic Band Heater Use Instruction:

1. The working voltage shall not exceed 10% over rated one.

2. The wiring part is placed outside the heating layer and the insulation layer. The enclosure should be effectively grounded.

Send your message to this supplier
To:  

Yancheng Hongtai Alloy Electric Apparatus Co.,Ltd

* Content:  

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity:  
  
Not exactly what you want? One request, multiple quotations Get Quotations Now >>
China Mainland Favorites
Transaction Level:

* Quantity: