Horizontal Injection Molding Machine DQ-1300T

1, if the machine cylinder screw temperature when the set temperature is not reached, you cannot place the machine open, otherwise there are contingencies that may occur.

2, to avoid the outside metal debris or other material to fall into the barrel, and if return-processing material at the time, also add audio magnetic Hopper, thus avoiding substances such as iron filings into the barrel.

3, if the melt temperature of the plastic is not unusual, but are often seen after the injection products above the black or the color has changed, must observe screw plastic head,

'S aprons and other components appear to be worn.

4, when using salivary, also make sure that the plastic barrel inside all melted to prevent screw back driveline components appear damaged issue.

5, before the plastics into brand new barrel should be mixed material inside to clean it again in.

After 6, injection-molded, to make every effort so that items can be averaged to plastic operations, so screw under the drive torque can be significantly reduced, so that you can make plastic injection molding machine

Use longer.