Antimony Doped Monocrystalline Silicon Ingot

The materials are then heated to a temperature above the melting point of silicon, around 1420 degrees Celsius. Once the polycrystalline silicon and dopant combination have been liquefied, a single silicon crystal, the seed, is positioned on top of the melt, barely touching the surface. The seed has the same crystal orientation required in the finished ingot. To achieve doping uniformity, the seed and the crucible of molten silicon are rotated in opposite directions. Once conditions for the crystal growth have been met, the seed crystal is slowly lifted out of the melt. Growth begins with a rapid pulling of the seed crystal in order to minimize the number of crystal defects within the ingot at the beginning of the growing process. The pull speed is then reduced to allow the diameter of the crystal to grow to slightly larger than the final desired diameter. When the target diameter is obtained, the growth conditions are stabilized to maintain the diameter. As the seed is slowly raised above the melt, the surface tension between the seed and the melt causes a thin film of the silicon to adhere to the seed and then to cool. While cooling, the atoms in the melted silicon orient themselves to the crystal structure of the seed.