Textile Fabric Coating Laminating Bounding Machine

1.main technical data:

1.1. working width:100~200cm adjustable (effective width180cm)

1.2. machine speed:5~65m/min inverter control

1.3. drive way:level chain rail( ball chain)

1.4. heating source:natural gas

1.5. chamber temperature: 120~180? automatic control

1.6. total power:˜ 60kW

2. process:open width entry? fabric tensioner? centring device? coating head( with Constant tension controller)? red infrared ray edge needle?18m stenter chamber? three roller cooling? Synchronous tracking? rolling device 

3.main structure:   

3.1. entry frame                                                    1set      

3.1.1 20#C steel frame                                              1set

3.1.2 cloth rollerF65× 3.5 Chrome plated tube                            2pcs

3.1.3 tensioner F70× 3.5 Chrome plated tube ,Steel and worm gear            1set

3.1.4 F100 Stainless steel (or chrome plated) guide roller                   5pcs

3.2. center device                                                   1set

3.3.coating head(constant tension control)                             1pc       

3.3.1 machine frame steel structure 

3.3.2 scraper table 20# steel grinding hard chrome plated with tungsten steel knife 

3.3.3 The scraper blade is provided by the Ma'anshan cutter factory

3.3.4 cutter blade 80*80 steel,up and down use pneumatic fast speed rise blade, electrical micro adjust, encoder detect, number show adjust amount. The worm wheel adjustment angle and scale display 

3.3.5 F214 surface hard chromium plating                              1pc

3.3.6 F100 Stainless steel (or chrome plated) cloth guide roller             2pcs

3.3.7 F150Aluminium alloy spreading roller                            1pc

3.3.8 automatic Glue blocking device (infrared and variable frequency control)                 1set

3.3.9 Automatic constant tension control device (Taiwan)                1set

3.3.10 operating table                                             2set

3.4. stenter chamber (18m)                                        1set

3.4.1frame 8,10# Channel steel and steel welded,each 4m is one chamber+ before2m

3.4.2 top 1.2mm Galvanized steel,floor 1.5mm Hot rolled plate,four side of door inner1.2mm Galvanized steel plate processing,outside 1.2mm Cold-rolled steel plate, Insulation thickness 100mm,Thermal insulation cotton board 50mm×2 heat insulation,Floor type door,Magnetic lock,Safe and clean maintenance more convenient

3.4.3 heating fan recycle fan 3kW,5#  Impeller                         8set

3.4.4 natural gas Italy“RIELLO”,ratio control                       8set

3.4.5 top exhaust fan3kW,5# fan                                   3set

3.4.6 up and down wind pipe 1mm Galvanized steel               each 8sets

3.4.7automatic temperature control                                    4set

3.4.7.1 temperature control(Japan“Fushi ”)                             4pcs

3.4.7.2 PT100 Platinum thermal resistance                              4pcs

3.5 Infrared automatic edge detecting device                            1set

3.6 Automatic amplitude modulation                                   1set

3.7 Horizontal transmission rail and ball chain                           1set

3.8 main drive device(18.5Kw)                                      1set

3.9 cooling device                                                1set

3.9.1 F570stainless steel cooling roller                                3pcs

3.9.2 drive gear                                                 1set

3.9.3 Dg20 Inlet head                                             3set

3.9.4 drive device                                                   1set

3.9.5 Synchronous control device                                     1set

3.9.6 spreading roller (aluminum alloy)                                1pc

3.9.7 Rubber roller and cylinder                                     1set

3.10 big rolling                                                    1set

3.11 electrical control                                               1set 

3.11.1inverter (Taiwan Delta)

3.11.2 temperature control gauge(Japan“Fushi”)

3.11.3operating button(Schneider)

3.11.4 Thermal relay, contactor (Schneider, SIEMENS)

3.11.5 CCTV monitor