Submersible Pool Pump

product description

  The company perseverance to carry out the product, to solve the sewage diving submersible pump in the product structure, parameter optimization, manufacturing process, operating efficiency, sealing leak-proof, material applications and other key technical issues, with more than 20 technologies, A number of research results, the formation of a mature motor, pump manufacturing process, compared to the product is safe and reliable, lightweight and practical, good performance of sewage discharge, long life, reasonable spectrum, easy selection

Structural features

  The overall structure of the pump is vertical, the whole machine diving, mechanical and electrical integration, suction suction, can drain dry surface of the surface shallow water. The product is mainly composed of two parts: the over-current component and the motor. The structure of the pump according to the flow of the discharge can be divided into external, built Type, semi-built-in.

  1? the pump, the impeller: in the measured test on the basis of careful selection and match the pump, impeller, so that no clogging, over-current ability of high efficiency, power curve flat, no overload. Impeller smooth, small vibration, smooth operation.

  2?the motor: specially designed submersible motor, IPx8 protection, F-class insulation to allow the temperature rise in the normal temperature conditions, the motor edge life extension, and diving cooling effect is good, the actual temperature rise is low, the motor edge long life.

  3?cable and its seal

  Cable with MT818.5-1999 coal mine flame retardant cable, cable core section by 40 degrees Celsius ambient temperature and motor full load power under long-term reliable operation design, if the work, the motor at non-full load power or in the environment below 40 degrees Celsius, long lasting.

  There is a seal between the cable and the motor gland to prevent the media from penetrating into the motor cavity from the interface between the cable and the motor cover.