Stickers Hot Melt NNL58

The stickers with pale yellow transparent hot melt Adhesive, mainly used for all kinds of stickers to move hot-melt Adhesive, hot melt Adhesive, liquid, high bonding strength, not drawing, high temperature performance is good and so on.

Technical parameters;

Melt viscosity: 808MPas@ 170 c

Softening point: 83 c

Gardner color: 0-1

Initial adhesion: >12# copper ball

Peel strength: >12N/in

Product features:

1) product number: NNL-58

2) product name: hot-melt pressure sensitive adhesives

3) appearance: light yellow transparent blocks

4) ingredients: synthetic rubber, resin

5) solid content: 100%

6) product features: sticky, smell the shallow, not drawing

Instructions for use:

1, recommended glue method: automatic gluing.

2 recommended temperature: 155-165 degrees

3, plastic boxes or hose if any carbon available clean-washing paraffin in 135 ?.

4, NNL-58 gel on the viscosity can be adjusted by temperature.

5 NNL-58 shall not be used with other brands of hot-melt glue.

6, after charging into the hot-melt glue tank, immediately close the plastic Groove cover to prevent foreign material contamination.

Security matters:

1, hot action, such as when feeding into the hot-melt glue tank, should wear safety glasses and oven Mitt.

2, at all times, NNL-58 the working temperature is not more than 200 ?.

3, the use of sites should be well ventilated and all open flame is strictly prohibited.

Storage: store in a cool and dry environment out of direct sunlight. Storage temperature should be below 35 ° c and far away sources of ignition and heat.

Shelf life: in the above storage conditions, the hot-melt Adhesive can be stored for 12 months

Carton: 20KG/box: about 0.5KG/in small pieces, 25KG/box: about 1KG/in small pieces.