Starch Adhesive Glue Powder for Paper Tube and Pipe Making

Starch glue powder for paper core making

The advantages:

l Fast dry.

l Strong adhesion.

l Economical.

l Environmental friendly.

The special adhesive for paper pipes using meets the needs of all kinds of paper pipes and machinery winding pipes, replacing PVA glue and other adhesive for paper pipes. The price is only half of other adhesive. It is easy to stick on and dries quickly.

The pipes pasted are harder and stronger evidently than those with PVA glue and other adhesive. It endures humidity well and fully meets the needs of all kinds of paper pipes humidity enduring. It endures humidity well and fully meets the needs of all kinds of paper pipes humidity enduring. It has a good quality and a low price. This kind of adhesive cannot only improve the intensity of paper pipes, but also can reduce cost largely. 

HS Code: 3505.2000

Specification

TEST REPORT OF STARCH GLUE POWDER
Paper core making

Water Glue Formula I (Single side gluing)

Glue making procedures:

1)Water 40 kg;

2)Put the glue powder 25kg into above water and stir evenly;

3)Add 2-2.2kg caustic soda into 5kg water and stir evenly for 5-10minutes; and then put this solution into above glue and stir evenly for about 5minutes;

4)Put 1.2-1.5kg borax into 5kg boiling water and stir evenly for 5-10minutes; and then put this solution into above glue of the step 3, note, stirring evenly while pouring;

5)Add around 30ml tributyl phosphate into the above glue of step 4 and mix it around evenly; and now the glue is completed finally

Water Glue Formula II (double sides gluing)

Glue making procedures:

1.Water 25kg;

2.Put the glue powder 25kg into above water and stir evenly;

3.Add 2-2.2kg caustic soda into 3kg water and stir evenly for 5-10minutes; and then put this solution into above glue and stir evenly for about 5minutes;

4.Put 0.8-1kg borax into 4kg hot water and stir evenly for 5-10minutes; and then put this solution into above glue of the step 3, note, stir evenly while pouring;

5.Add around 30ml tributyl phosphate into the above glue of step 4 and mix it around evenly; and now the glue is completed finally

Remark:

1.The function of the caustic soda: gel builder, main content should be over 96%; normally the caustic soda can make the gel translucent; if put it into too much, the final glue is easy to be thick; in case of bad quality of the caustic soda, should put more caustic soda;

2.The function of the borax: to improve the viscosity of the final glue;

3.The action of the tributyl phosphate: antifoaming agent, if there are large bubbles, add it, if no bubbles, no need to use this chemical. More foam, more of it can be used; but the excessive can reduce the viscosity.

If the high-end starch adhesive glue powder for paper tube and pipe making caters to your requirement, welcome to buy the quality products for sale with us. We're one of the professional manufacturers in China, and we will offer you unmatched prices and service.