Special Custom Automatic Car Sound Absorbent Cotton Welding and Cutting Machine

The machine is mainly applicable to the molding of flexible materials such as automobile interior trim and insulation acoustic felt. Materials, hard materials and soft materials are available. The product technical performance index reaches the international advanced level, can cooperate the production line work. High degree of automation, saving labor and saving raw materials.

1, rapid intelligent storage tanks double oil cylinder and precise four-column double connecting rod automatic balance mechanism, ensure the accuracy of the cutting depth of each cutting position is 0.2 mm, four bar linkage gear die fine-tuning mechanism, control cutting die die cutting on the aluminum alloy board does not hurt when the blade, the finished edge effect is good. The imported hydraulic original control ensures the cutting speed and precision of the machine, and the automatic lubricating device is adopted for all sliding joint parts.

2. When the die cutting head is pressed, the contact material dies automatically and slowly, and the sealing edge of the material is tightly bonded to the lower layer, while the pressure die is cut.

3. Because of the good balance of the die, the loss of blade and cutting board can be reduced, the cutting edge has a better effect, it can reduce the cutting plate's consumption and the damage of the die.

4. The conveying part adopts the control of Mitsubishi PLC in Japan, and the servo motor drives the material from one side of the machine. After cutting, it outputs from the other side to ensure good feeding and smooth operation. And the feed length can be easily adjusted by the touch screen, the fault display information adopts the color change prompt of the display signal lamp to facilitate machine maintenance.

5. Servo motor feeding and charging make the alignment accuracy control at plus or minus 2mm and equipped with infrared rectifying and magnetic powder tension control device.

6. Special mold setting construction, matching with cutting tool and die cutting height. Digital precision adjustment mode cutting depth and keeping time make the stroke adjustment simple and accurate.

7. Automatic lubrication system ensures machine accuracy and improves machine durability.

8. It is equipped with infrared photoelectric safety protection device, equipped with a safety shield to make the operation more secure.

10. Automatic control adjustment and pneumatic automatic lifting device of knife mould. It is convenient and fast to replace knife mould.

11. The input and output of the materials shall be carried on the front and rear synchronous conveyor belt by cylinder clamping, automatic die-cutting and safe and convenient.

12, the heating plate temperature fluctuation template is divided into six control segments (0-200 starting 36 kw power, about 20 minutes or so constant temperature), according to the product free adjustment, stamping properties can be set according to the material in the course of hot pressing temperature and the material forming the holding time.

13. The feeding rack is automatically feeding with single volume automatic tension gas shaft.

Products photos

Automotive interior cutting machine