Skikda Lng
-
Min Order
1
-
Product Unit
Pieces
-
Origin
China Mainland
-
Payment
- Contact Now Start Order
- Favorites Share
- Description
Product Detail
LNG pump skid,Pump skid assembly,Pump skid definition,Pump skid design,Pump skid drawings,Pump skid fabrication,Pump skid installation,Pump skid manufacturer,Pump skid manufacturers UK,LNG Skid,Cryogenic pump,cryogenic filling pump,cryogenic liquid natural gas pump,skikda lng,lng metering skid,lng regasification skid,lng vaporizer skid,skid mounted lng plant,skid mounted lng.
LNG pump skid
The main work of the LNG solution is to pressurize the liquid in the LNG cryogenic tank after passing through a low temperature submersible pump and then piping it to the LNG solution. It is metered and injected into LNG-fueled vehicles.
The design uses skid-mounted, that is, low-temperature storage tanks, pressurized carburetor, piping, control valves, low temperature submersible pump, pump and filling system, such as concentrated on the skid mounted. The station has the following characteristics:
? highly centralized, integrated design, small footprint: on-site installation of small, put into use fast;
? skop design, easy to transport and transfer, with good mobility;
? key components imported original parts, electrical instrumentation system according to explosion-proof design, safe and reliable;
? process pipeline short, pre-cooling time is short, filling speed;
? PLC automatic control, man-machine interface is good, easy to operate.
In order to system security, to ensure the use of explosion-proof electrical parts to reduce the cost, the control cabinet is independent of the pry block, installed in the safe area of the control room, in line with national standards.
LNG PUMP SKID
Design parameter | Single-pump-mount skid | Double-pump-mount skid | |
Dimensions: L*W*H mm |
With vaporizer |
5000x2500x2600 |
6000x2500x2600 |
Without vaporizer | 4000x2500x2600 | 5000x2500x2600 | |
Safety valve work pressure (MPa) | 1.15/1.76 MPa | 1.15/1.76 MPa |
Parameters of vaporizer
Offloading/pressure relief saturation vaporizer | EAG heater | |
Working Pressure(MPa) | 0.8 | 1.00 |
Design Pressure(MPa) | 2.50 | 2.50 |
Pneumatic test pressure(MPa) | 2.75 | 2.75 |
Capacity (Nm³) | 300 | 150 |
Working Temperature (?) | -162? | -162? |
Service medium | LNG-CNG | LNG-CNG |
Parameters of cryogenic sump
Liner | Sump | |
Service medium | LNG | \ |
Material | S30408 | S30408 |
Working Pressure | 2.0MPa | -0.1MPa |
Design Pressure | 2.5MPa | -0.1MPa |
Design Temperature | -196? | 50? |
Pneumatic test Pressure | 2.86MPa | \ |
Leakage test Pressure | 2.5MPa | \ |
Volume | 0.054m3 | \ |
Parameters of submerged pump
Model | ACD TC-34 |
Assembly PN | 54095-3 |
Service | LNG |
Pump speed | 5800RPM |
Capacity | 300L/min |
Head | 200m |
Power | 7.3Kw11KW |
NPSHR | 1.4m |
Suction Pressure | 0.24MPa |
Discharge Pressure | 1.50MPa |
Parameters of cryogenic pipelines
Material | 06Cr19Ni10 |
Design Pressure | 2.5MPa |
Working Pressure | 0.6 ~ 1.1MPa |
Design Temperature | -196? |
Working Temperature | -162? |