Servo Programming

  • Description
Product Detail


blob.png



SPECIFICATION

RBS582


? Size: 38×19×38.5mm

?Torque: 9.2kg·cm

? Speed: 0.11s/60 ?

? Weight: 42g

? The maximum operating angle: 180 ?

?Working voltage: 4V to 9V (measured at 7.4V)

? Control method: PWM

?Line length: 40cm

?Axes are equipped with standard equipment

?????????????????????????

?There is a chance that you can't have it.




???-4.jpg

Overview

JR - JRPSNX8935 - NX8935 Pro Ultra Speed Smart Servo



The NX8935 servo is JRs latest iteration in their line of giant scale high-speed servos, ideal for cyclic duties on 600-sized and larger helicopters, as well as aircraft where speed and precision are of the utmost importance.

Based on the previous NX8925, the new NX8935 features updated firmware, optimized for performance and efficiency, and a new modified and reinforced top case for increased durability.

Featuring automatic output detection, these new JR Smart Servos can be used with either conventional (PWM) or XBus installations for ease and flexibility. Programming is simple via your XBus-equipped JR XG-series DMSS transmitter, and not only can servo direction and travel be adjusted, but it is now possible to fine tune holding power, stopping speed, dead band, starting power, total servo travel, create an alarm if servo load exceeds a user-set limit, enable slow start, as well as enhanced failsafe features to help protect your servos in the event of signal loss.

Not using XBus- fear not. The NX8935 also features JRs unique automatic output detection, so it can be used in standard configuration with either conventional (PWM) or XBus installations for ease and flexibility with virtually any brand of equipment.

If youre looking to take the performance of your model to unprecedented heights, take a look at the new NX8935 servos from JR and feel the difference the new JR NX Smart Servos can provide.

Comments

Current NX8925 Owners can send their existing NX8925 servos to JR Americas for an upgrade to NX8935 specifications. Firmware will be updated to the more optimized and efficient NX8935 specs, and case tops will also be replaced with updated NX8935 case tops and labels. Cost is $10.00 per servo. Please download and complete the JR Americas service form at: http://www.jramericas.com/pdf/jr_americas_repair_service_form.pdf or contact us at service@jramericas.com for more information.

Specifications

  • Torque: 162.4 (4.8V)/199.9 (6.0V)/247.1 (7.4V)

  • Dimensions (L/W/H): 1.59x0.83x1.38 in

  • Weight: 2.54 oz

  • Input Voltage: 4.8-8.5v

  • Shaft Support: Dual Ball Bearing

  • Speed: 0.10 (4.8V)/0.07 (6.0V)/0.06 (7.4V)

  • Comparable to DS8917HV




???-4.jpg


Overview

JR - JRPSNXB89G - NXB89G Ultra Speed Brushless Tail Servo


Ask any competition or 3D Heli pilot what their servo of choice is, and youll undoubtedly hear “JR of course”. This isnt by accident- JR servos like the legendary 2700G and 8900G have provided the perfect blend of brute strength and precision, with unmatched reliability for decades.

In keeping with this tradition, JR has just released their next servo that is destined to be their next legend in helicopter tail servos, the new NXB89G Ultra Speed Brushless Tail Smart Servo.

Based on the legendary 8900G, the NXB89G in addition to its highly efficient and powerful brushless motor, features updated firmware, optimized for performance and efficiency, as well as a CNC Machined aluminum heat sink center case for the ultimate in durability. Add to that a plethora of programmability to customize and fine tune each individual servo to its specific location on the model via JRs innovative XBus DMSS Serial Bus system, and well, the NXB89G might just be JRs best tail servo of all.…

Not using XBus- fear not. The NXB89G also features JRs unique automatic output detection, so it can be used in standard configuration with either conventional (PWM) or XBus installations for ease and flexibility with virtually any brand of equipment.



Specifications

  • Torque: 62.19 (4.8V)/97.21 (6.0V)/104.15 (7.4V)

  • Speed: 0.05 (4.8V)/0.04 (6.0V)/0.03 (7.4V)

  • Dimensions (L/W/H): 1.55x0.82x1.59 in

  • Weight: 2.29 oz

  • Input Voltage: 4.8-8.5v

  • Shaft Support: Dual Ball Bearing

  • Comparable to DS8900G



blob.png




More product parameters, please contact us online...



Send your message to this supplier
To:  

ToFree Aviation Technology Co.,Ltd

* Content:  

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity:  
  
You May Like
Not exactly what you want? One request, multiple quotations Get Quotations Now >>
China Mainland Favorites
Transaction Level:

* Quantity:

You May Like