Plastic PE PP PS Cloth Hanger Injection Molding Machine with Servo Motor and 400ton Clamping Force

cloth hanger injection molding machine

This cloth hanger molding machine can use PE PP PS to produce plastic hangers

Parameter summary of cloth hanger injection molding machine:

Screw diameter:45-55mm

Shot weight:326-486g

Injection stroke:225mm

Max. clamping force:1600KN

Space between tie bars:480*480mm

Features of cloth hanger injection molding machine:

Transducer control clamping stroke

The speed of low speed and large torque hydraulic motor can be freely adjusted

Imported technology hydraulic hose and fittings

Alarming system in case of cold start and no material in hopper

Technical Parameter
ITEM	UNIT	SZ-1600A
INJECTION UNIT
SCREW DIAMETER	mm	45	50	55
SCREW L/D RATIO	L/D	23.3	21	19.1
THEORETICAL SHOT VOLUME	cm3	358	442	534
SHOT WEIGHT(PS)	g	326	402	486
INJECTION PRESSURE	Mpa	219	178	147
THEORETICAL INJECTION RATE (PS)	g/s	142	175	212
PLASTICISING CAPACITY	g/s	20.1	26.5	34.2
SCREW TORQUE	N.m	1250
MAX.SCREW ROTATE SPEED	r/min	200
INJECTION STROKE	mm	225
CLAMPING UNIT
MAX.CLAMPING FORCE	KN	1600
MAX.OPENING STROKE	mm	460
SPACE BETWEEN TIE BARS	mm	480?480
MOULD HEIGHT	mm	180-500
MAX.DAYLIGHT	mm	960
EJECTOR FORCE	KN	45.2
EJECTOR STROKE	mm	115
EJECTOR QUANTITY		5
OTHER
PUMP MOTOR POWER	KW	15
PUMP PRESSURE	Mpa	16
HEATING POWER	KW	13.6
HEATING ZONE		4
SIZE	m	5.3?1.35?1.9
NET WEIGHT	t	5.6
OIL TANK CAPACITY	L/D	420
INTERNATIONAL DESIGNATION		1600-785