PE PET Polythene Label Rotogravure Printing Machine

Technical parameter (Based on 6 colors)

Feature:
1. Main motor servo motor control, comparing with inverter motor, it has higher precision and longer life.

2. Unwind double station turret with air shaft, magnetic powder brake control.Before one roll is finished printing, prepare another roll on the shaft, so you do not need to stop the machine to change the roll

3. Rewind double station turret with air shaft, two torque motor control.Before one roll is finished printing, prepare another roll on the shaft, so you do not need to stop the machine to change the roll

4. Independent chassis without connection, the bolt will be installed into the ground which make machine more stable during high speed running.

5. Pneumatic heavy type doctor blade has a longer life and it can remove extra ink completely from the printing cylinder to make the printing more clear and shinning.

6. Shaftless pneumatic printing cylinder installation which can save much time

7. Ink is circulated automatically by ink pump, you do not need to pour the ink manually into the ink plate which is convenient and save much time.

8. Special ink plate design make ink circulate more easily.

9. Automatic computer register which can make color control precise.
Video inspection system, you can watch the printing picture by computer monitor, so that you will know the printing accuracy is good or not.

10. Double long register screw make registration accurate.

11. Independent drying and suction exhausting system, air circulated, max recycled rate 50%, waste air eliminating tunnel. External blower increase the air amount for a better heating.

12. Oven is pneumatic open and close which is convenient for material guiding.

13. Assisted oven install on the top of last printing unit to completely dry the printing material.

14. It can be installed with turning bar to realize reverse printing.

15. It can be installed with EPC device on unwind part especially for PE material when the thickness of material is different.

Printing sample: