New Cobra ODE Complete Version V5.30A Optical Drive Emulator Support V4.60 OFW For All PS3 Console

  • Description
Product Detail

News:
10 - 9 - 2014
Cobra ODE News - Information
PS3 last firmware 4.65 now supported-- Team Cobra can now confirm that all Cobra ODE versions (v3,V4 and v5 hardware) are functional on OFW 4.65 whilst using Cobra 2.2 fw on 4k series consoles.

Note: Without the EMU USB QSB board from now on.

10 - 9 - 2014
Cobra ODE News - Information
Pictured below is the new DMC module for PHAT PATA, SATA PHAT, 2k, 2k5 and 3k consoles which enables use of all versions of Cobra ODE (3.xx/4.xx and 5.xx) on 4.60 OFW. A swap disc is required in line with current usage of Cobra ODE on OFW 4,60 and 4k consoles.

The DMC module has an Actel FPGA on board which controls the optical lens' units disc eject motor, thus enabling us to insert and remove discs without detection by the drive controller. The onboard FPGA is linked to a USB PHY which enables full reprogramming of the FPGA at any time via USB connected to your PC.

The Cobra DMC connects to the Cobra ODE (all models) via the JTAG 24 pin FFC port on the Cobra ODE and the "main" port on the Cobra DMC. All necessary cables are included.

The Cobra DMC can be mounted adjacent to the optical drive of your PS3. The module then connects to the eject motor inside your drive, without soldering via FFC cables.

27 - 8 - 2014
Cobra ODE News - Update
Cobra Team have updated the 2.2 fw archives for Cobra ODE v5.30A with chipset "M2S010" to correct a problem which prevented updating from 2.1 to 2.2.

All 5.30A users should therefore update to 2.2 with this update.
Cobra ODE Firmware v2.2 Fixed2

19 - 8 - 2014
Cobra ODE News - Update
We are happy to release the 2.2 update for all Cobra versions including the 5.1B and 5.3A PCB revisions V5.x boards, we have increased USB read speeds by 40%* and further improved the success rate of swapping discs for the bypass.

Furthermore, we have added support for 4.60 ofw bypass and new bypass tools (applicable to all Cobra ODE versions v3.x, 4.x and 5.x)

We have also added a another nice features, auto region patching for psx games.

Various fixes for stability and configuration have been added, please refer to the changelog in the mcu update folder.

V5.30A users please note that a bug has been fixed in the 2.1 firmware which caused ISO's not to load if the drive door was not toggled open and then closed. Please ensure you update to the 2.2 Cobra ODE fw asap.

We have now successfully bypassed 4.60 ofw on older PS3 consoles (PATA, SATA FAT, 2k, 2k5 and 3k models). An additional hardware module (Cobra DMC) is required and will be sold bundled with 5.10B or 5.3A versions of the Cobra ODE.

24 - 6 - 2014
Cobra ODE News - Information
We are now accepting pre orders for the new 5.30A complete version of Cobra ODE pictured below, which supports PATA PHAT consoles, SATA PHAT and 2K/2K1 SATA consoles and 2K5,3K/4K SATA QSB consoles.

The Cobra 5.30A complete will be sold in parallel with Cobra 5.10B QSV version.

Features:
- Supports virtually all PS3's including previously "unbreakable" 2k5,3k and 4k systems!
- Homebrew now possible on previously "unbreakable" 2k5,3k and 4k systems!
- Play games on SEN in pass-through or emulation modes**!
- On screen selection of games through Cobra ODE manager in XMB
- Emulation or pass-through modes
- PS1 game support
- Ps2 ISO support on backward consoles
- DVD and BD movie support
- Advanced Smart Fusion AES encryption and decryption engine on board
- Fully updatable high speed FPGA's and high speed secure MCU on board
- Updatable via USB storage
- Expansion ports for future proofing
- Simple and easy to use
- High quality components used throughout
- Built at a high tech facility
- Solderless installation on FAT*** and SLIM (2xxx and 21xx) series
- Easy installation on 25xx,3xxx and 4xxx series Slim and Super Slim series consoles with QSB (quick solder board)
- Easy setup for PATA or SATA consoles
- Advanced software onboard and frequent free updates
- PS3 BD game disc dumping on all PS3 consoles is supported and can be enabled through third party managers (dumping throughput will be improved in future updates)

Consoles Supported:
FAT:

CECHA (PATA)
CECHB (PATA)
CECHC (PATA)
CECHE (PATA)
CECHG (PATA)
CECHH (PATA)
CECHK (PATA)
CECHL (SATA) (most consoles)***

SLIM:
CECH2XXX (SATA)
CECH21XX (SATA)
CECH25XX (SATA)
CECH3XXX (SATA)

SUPER SLIM:
CECH4XXX (SATA)

Item:
1* New Cobra ODE Complete Version V5.30A Optical Drive Emulator Support V4.60 OFW For All PS3 Console

Send your message to this supplier
To:  

SparePartStop

* Content:  

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity:  
  
You May Like
Not exactly what you want? One request, multiple quotations Get Quotations Now >>
China Mainland Favorites
Transaction Level:

* Quantity: