Multifunctional Spacer Tabs to Create A Ideal Gap for Irregular Tiles

Multifunctional spacer tabs to create a ideal gap for irregular tiles.

Moonbay plughole spacer tabs are used for irregular shaped tiles, such as triangular paving tiles, Hexagonal pavers, Pentagonal paver tiles etc...   

This system inspires creative architecture with unlimited possibilities. Independent plughole spacer tabs are fixed to the head of the pedestal and with the unique 360° rotation, the space between pavers will match perfectly.

Maintenance Guide

Routine maintenance of your paver deck system will enhance the beauty, reduce major repairs, and prolong the life of your deck.

Below is a list of maintenance guidelines that should be performed on a regular basis:

1. Check for “rocking” pavers. If you notice pavers rocking back and forth while walking on the deck simply lift paver up and shim 1 or more corners until paver is level on all four corners. To ensure pedestal stability, make sure “indicator bumps” are engaged. Moonbay shims can be ordered and shipped.

2. Depending on substrate materials some settling and or deflection can occur. Remove paver and adjust the pedestal until level height is achieved. You may need to do this on more than one pedestal to level out an area.

3. Clean drains and scuppers on a regular basis. Water should completely drain off roof deck within 48 hours after rainfall, under ambient drying conditions. Standing or “ponding” water can be detrimental to some waterproofing systems.

4. Periodically check spacer tabs between pavers and replace broken spacer tabs immediately. Loss of spacer tabs can cause unsafe deck movement.

5. Make sure the edge restraint remains intact. There should not be room around perimeters of the deck in excess of 1/8” width which could cause lateral movement of pavers, and create an unsafe condition.

6. Follow paver manufacturers’ suggestions for upkeep and maintenance of pavers.