Metal Melting Furnace Equipment

Min Order

1
Product Unit

Pieces
Origin

China Mainland
Payment
Contact Now Start Order

Description

Product Detail

Metal melting furnace equipment can be divided into steel shell and aluminum shell metal melting furnace, we generally recommend the steel shell. Steel shell intermediate frequency smelting furnace consists of medium frequency power supply cabinet, compensation capacitor bank, steel shell furnace body, yoke and water cooling cable, hydraulic station, tilting furnace control box and so on. It is mainly used for melting steel, iron, copper, aluminum and alloys, etc. It has high melting efficiency, good energy-saving effect, uniform metal components, less burning loss, rapid temperature rise, easy temperature control, etc., and is suitable for various metal melting occasions.

Metal smelting furnace equipment product advantages
1. The power consumption of steel smelting tons is 550-600KW.h under normal working conditions;
2. The power factor is maintained over 0.96 during the whole process, and no additional compensation device is required;
3. Effectively control higher harmonics, do not interfere with surrounding electrical equipment, and do not pollute the power grid;
4. Wide frequency adaptability range, keeping the best resonance state during the melting process;
5. zero voltage scanning soft start mode, can be started or stopped at any state at any time, no impact on the power supply;
6. rapid smelting, low production costs; pollution is small, in line with national environmental protection requirements;
7. can be directly from the cold furnace melting, the solution can be all empty, easy to replace the melt species;
8. It is flexible and convenient for power adjustment, and can be adjusted continuously and smoothly; the temperature is even and easy to control; there is less oxidation loss, and the metal composition is uniform;
9. The furnace shell is made of steel structure or cast aluminum alloy, which occupies a small area; the furnace body is easy to flip and dump, and manual, electric, and hydraulic tilting furnace modes are available;
10. leakage alarm device, timely and effective protection of personal and equipment safety;

The maximum heating capacity of each smelting furnace of the metal smelting furnace equipment is listed in the following table. When the cooling furnace is used, the smelting time per furnace is 50-60 minutes. When the hot furnace is used, the smelting time per furnace is 20-30 minutes.

Main specifications	Maximum input power	Smelting capacity of commonly used materials
Main specifications	Maximum input power	Steel, stainless steel	Brass, copper, gold, silver	Aluminum and aluminum alloys
LC-15 melting furnace	15KW	3KG	10KG	3KG
LC-25 melting furnace	25KW	5KG	20KG	5KG
LC -35 smelting furnace	35KW	10KG	30KG	10KG
LC -45 Melting Furnace	45KW	18KG	50KG	18KG
LC -70 melting furnace	70KW	25KG	100KG	25KG
LC-90 melting furnace	90KW	40KG	120KG	40KG
LC-110 melting furnace	110KW	50KG	150KG	50KG
LC-160 melting furnace	160KW	100KG	250KG	100KG
LC -240 melting furnace	240KW	150KG	400KG	150KG
LC -300 melting furnace	300KW	200KG	500KG

The above is the basic information of the metal smelting furnace equipment. If you want to know more product information, product pictures or videos, please contact us in time!

Send your message to this supplier

To:

Zhengzhou lingcheng electronic technology co., LTD

* Content:

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity: