Measuring Systems

JP-380 Electrical Measuring unit is a Micro-computer Electric Measuring Instrumentation newly developed by ourselves with piezoelectric transducer as electromechanical sensor,The measuring unit can show rotating speed,measured value,and phase position intuitively with options of six support models available while the piezoelectrical sensor possesses a large capacity of output,small volume and high stability

FUNCTION INTRODUCTION

1. Digital Display of measured value and angle,direct and easy to read

2. Intel 8051 chip,safe reliable and fast

3. Imported components with lower failure rate

4. Multi-methods of compensation

5. Auto lock of rotating speed

ADVANTAGES

1. Coming with Intel 8051Microcontroller Unit, The main machine system is highly stable and anti-jamming

2. Digital-tube display,Direct and easy to read

3. The High-quality main components are imported from the America and Japan

4. The data collecting system employs automatic programmed amplifier and high-performance filter with the dynamic measuring range being more than 80DB

JP-580B Electrical Measuring unit is a system of top function and precision. It can be applied in all kinds of single/double plate and hard/soft bearing machines, and can be connected with different velocity and pressure sensors easily. The unit adopts industrial computer mainboard which equiped with 15-inch LCD screen ,1G memory ,Electric board 4 G Windows XP Operating System. Featuring with high running speed and reliabilitystrong dustproof and shakeproof ability, it is applicable to various industrial environments.

FEATURES

1. LCD of 15inches

2. Windows XP Operating System

3. Chinese or English Display

4. Storage for 1000 sorts of rotor parameter and 10000 items of measuring records

5. Sophisticated balancing software

6. Multi-methods of algorithms

7. 10-stage calibration offers higher precision

8. Multi-methods of Compensation

9. Auxiliary display for drilling and cutting

TECHNOLOGICAL DATE:

1. Scope of RPM: 120-12000 r/min

2. Minimum resolution: 0.001mg

3. Shortest measuring time: 3s

4. Measurable dynamic range:1:100000

FEATURES OF PRODUCTS:

1. Various Measuring Methods: dynamic balancing, static balancing or both, ten support
modes, adding or reducing weight and CW or CCW rotating can be customized flexibly.

2. High Precision: multi-Calibration coefficient combination, automatically adjust the
system sensitivity, no shift-skip,dual wave filtration by both hard and soft-ware,highspeed
data compression, faster,more stable and accurate measurement.

3. DIY unit:Balance unit displayed, angle unit and precision displayed can be defined by
user.A real-time unit conversion is available to meet different requirement.

4. Complete compensation,flat key compensation,fixture compensation,up to 9 times of
dislocation of fixtures.

5. Technological algorithm:Indexing Algorithm,Drilling Algorithm, Milling Algorithm and
Crankshaft Algorithm.

6. Consummate Calibration Process:Specialized Calibration interface is provides more
convenience for maintenance.Up to 10 Calibration segments.Real-time verification of
Calibration with linear chart.

7. Sensor disconnection alarm:Automatic diagnosis of sensor disconnection, Prompt
evading of false balance.

8. Bilingual:Optional language of English or Chinese for display and report form printing.

9. Convenient Operation:Numeric and vector-combined display of measured values.Hint
for all the definings of parameter and the setup of domain.

10. Large storage of data:Database storage.Limitless storage of Rotor data, jig data and
10000 pieces of measured loop records.

11. History:Auto record of history,Optional methods of recording.

12. Good commonness of data:Database files can be opened in MS Office.Operations like“Find”, ”Stats”, ”Filter”, ”Classify” and ”Leadout” are available via the ancillary software.

13. Multi-report Form of Measurement:Measurement report-form, Balance Report-form,
Single-plane Measurement Report-form, etc. Note information for motor data can be
added anytime and displayed in report-form.

OPTIONAL CONFIGURATION

1. General management of multi-balancer: Able to establish a monitor-center for
synchronous monitoring work process of more than one balancer and effective
manipulation of the data

2. Cursor Guides the Angle:The cursor can show the phase position of the rotor in the
extra-added module,which can help user to find the unbalance point

JP-580 Electrical Measuring unit is a system of top function and precision. It can be applied in all kinds of single/double plate and hard/soft bearing machines, and can be connected with different velocity and pressure sensors easily. The unit adopts industrial computer made in Yanxiang Industry Co, which equiped with 17-inch LCD screen and Windows XP Operating System. Featuring with high running speed and reliabilitystrong dustproof and shakeproof ability, it is applicable to various industrial environments.

FEATURES

1. LCD of 17 inches

2. Windows XP Operating System

3. Chinese or English Display

4. Storage for 1000 sorts of rotor parameter and 10000 items of measuring records

5. Sophisticated balancing software

6. Multi-methods of algorithms

7. 10-stage calibration offers higher precision

8. Multi-methods of Compensation

9. Auxiliary display for drilling and cutting

TECHNICAL DATE:

1. Scope of RPM: 120-12000 r/min

2. Minimum resolution: 0.001mg

3. Shortest measuring time: 3s

4. Measurable dynamic range:1:100000

FEATURE OF PRODUCTS:

1. Various Measuring Methods: dynamic balancing, static balancing or both, ten support
modes, adding or reducing weight and CW or CCW rotating can be customized flexibly.

2. High Precision: multi-Calibration coefficient combination, automatically adjust the
system sensitivity, no shift-skip,dual wave filtration by both hard and soft-ware,highspeed
data compression, faster,more stable and accurate measurement.

3. DIY unit:Balance unit displayed, angle unit and precision displayed can be defined by
user.A real-time unit conversion is available to meet different requirement.

4. Complete compensation,flat key compensation,fixture compensation,up to 9 times of
dislocation of fixtures.

5. Technological algorithm:Indexing Algorithm,Drilling Algorithm, Milling Algorithm and
Crankshaft Algorithm.

6. Consummate Calibration Process:Specialized Calibration interface is provides more
convenience for maintenance.Up to 10 Calibration segments.Real-time verification of
Calibration with linear chart.

7. Sensor disconnection alarm:Automatic diagnosis of sensor disconnection, Prompt
evading of false balance.

8. Bilingual:Optional language of English or Chinese for display and report form printing.

9. Convenient Operation:Numeric and vector-combined display of measured values.Hint
for all the definings of parameter and the setup of domain.

10. Large storage of data:Database storage.Limitless storage of Rotor data, jig data and
10000 pieces of measured loop records.

11. History:Auto record of history,Optional methods of recording.

12. Good commonness of data:Database files can be opened in MS Office.Operations like“Find”, ”Stats”, ”Filter”, ”Classify” and ”Leadout” are available via the ancillary software.

13. Multi-report Form of Measurement:Measurement report-form, Balance Report-form,
Single-plane Measurement Report-form, etc. Note information for motor data can be
added anytime and displayed in report-form.

OPTIONAL CONFIGURATION 

1. General management of multi-balancer: Able to establish a monitor-center for
synchronous monitoring work process of more than one balancer and effective
manipulation of the data

2. Cursor Guides the Angle:The cursor can show the phase position of the rotor in the
extra-added module,which can help user to find the unbalance point

JP-680A/680B/680 Electrical Measuring unit 

CONFIGURATION

1.15-inch touch screen/10-inch touch screen/15-inch touch screen
2.Win CE operating system

FEATURES

1.Touch-screen operation:Man-machine friendly interface,operate more convenient

2.Chinese english display:Display language can be changed between Chinese and English.
3.Intuitive:
1)Measured value display is a combination of numbers and vector graphics,Vector graphics can quickly detect the amount degree of imbalance and angle orientation,Graphic scale values can be adjustable,Easy to set up various grades.
2)There are tips for all system parameter,including parameter definitions and setting range. Easy for users to quick start
3)Automatically determine whether the rotor is quality.There are colored tips
4)Flexible calibration mode,Process also has the guide's instructions.More professional calibration interface,easy to maintain,Calibration process arbitrary execution,it display original measurement data,up to 100 calibration stages
4.High precision dispaly:Minimum resolution of 0.001mg.
5.Measurement speed:120-12000r/min
6.Single/double plane balancing measure:Balancing measure has double plane dynamic balancing, single-plane static balance and static and dynamic balance methods to choose
7.Variety of supporting mode:Traditional six kinds of double-plane and single-plane supporting mode.wide range of application
8.Diversity of calculation method:With a mathematical model and a physical model calculation way,Applicable for all kinds of hard bearing and soft bearing balancing machine
9.Sensor detection:Can diagnose sensor or whether the sensor is faulty, to avoid workpiece false balance
10.Electronic compensating:With electrical compensation,Treat common rotor as test rotor,applicable for all conditions,Debugging more convenient, system model is more in line with the actual situation
11.Indexing function:Solving the balancing problem of rotor blade ,display unbalance amount of each blade directly
12.Unbalance calculation:Software in accordance with the ISO1940 standard, built-in allowable unbalance calculate,just input related parameter,we can calculate the allowable unbalance amount directly
13.Waveform Display:You can see the waveform amplitude signal acquisition.
14.USB Data Export:Measurement data can be exported through U disk.
15.100 Rotor data storage:Rotor data can be saved for next measure use
16.Data Printing:Print report contains rotor parameters, correction plane information, eligibility criteria, measurement data, vector and qualified judgment and other information, for A4 paper format
17.Calculator
18.Calendar