Lift Bucket Belt Product Structure

Hydrocyclone structure as shown in Figure: the upper part of the cyclone device is a cylindrical, barrel body is provided with a and the cylinder wall was tangent direction of ore feeding pipe, the center of the cylinder with an overflow pipe; the lower part is a cylinder connected with the inverted cone, Cone of cone angle between 15 to 60 degrees, and the lower end of the cone is installed a sinking sand mouth, between the various parts were used flange and bolt connection, which is convenient for replacing. When the pulp to a certain pressure 0.5-2.5kgf/cm2 and velocity 5-12m/s from the ore feeding pipe according to the tangent direction into the cylinder, then around the axis high-speed rotation, resulting in a large centrifugal force. Pulp particle size and density of different particles, due to the different by the centrifugal force, so they in a hydrocyclone velocity acceleration also each are not identical, thick and heavy particles being thrown against the wall of the tube, according to the spiral line track backspin to the bottom, as sinking sand discharged from the spigot. The fine and light particles are carried to the center, forming a spiral flow in the center of the conical cylinder.