HG 90190

Min Order

1
Product Unit

Pieces
Origin

China Mainland
Payment
Contact Now Start Order

Description

Product Detail

Description
Slip rings of HG series can be used to mount the slip ring on a bracket or used for routing space for hydraulics.Multi-contacting can ensure contacting reliable with low wear.The through hole can be from 2.0mm to 1000mm.

Features
? Suffice 360 degree unrestrained continuous rotation
to transmit power or data.
? Maintenance free
? Operating smoothly and reliability
? Extremely low electrical noise
? Precious metal contact ensures long life-span
? Convenient to assembly
? Modularized design and also provide customized solutions.
? Compatible with data bus protocols

Typical applications

? Electrical test equipment	? Exhibit / display equipment
? Manufacturing and process control equipment	? Laboratory equipment
? Indexing tables, Cable reels	? Camera system
? Robotics, rotary sensors, urgent illumination	? Aviation, military, marine and medical
equipment	equipment

Options

? Operation speed, current &voltage	? Housing color
? Flange mounting	? Position of wire outlet
? Connector	? Wire length
? No. of circuits	? Protection level (dust and water)
? Housing material	? Signal,power and data transmitted or
? Inner diameter	combination transmitted

Electrical data

Specification	value
Specification	Power	Signal
Rated Voltage	380VAC/240VDC	240VAC/VDC
Rated Current	10A, 15A or 20A	5A
Insulation Resistance	1000MO/500VDC	500MO/500VDC
Lead Size	AWG16 tinning TEF for 10A AWG14 tinning TEF for 15A and 20A	AWG22 silver plated TEF
Dielectric Strength	1.000VAC@60Hz,60s between each circuit
Electrical Noise	<0.01O
Lead length	Standard 300mm

Mechanical data

Operating Speed	0-600rpm
Working Temperature	-40? - +80?
Working Humidity	75%RH or higher
Contact Material	Precious Metal
Bearing	Steel ball bearings
Structure Material	Engineering Plastic or metal
Torque	0.1N/m for 6 rings, 0.03N/m increased for every 6 rings added.
IP Rating	IP 51~IP67
Operational life	= 50,000,000cycles (Depends upon working temperature, rotating speed, environment and continuous working time)

Outline dimesion unit

Model explanation

Model	Length	No. of power circuits (10A,15A,20A)	No. of signal circuits (5A)	Total No. of circuits
HG90190-6P	88.5	6	-	6
HG90190-12S	88.5	-	12	12
HG90190-12P	118.5	12	-	12
HG90190-6P/12S	118.5	6	12	18
HG90190-24S	118.5	-	24	24
HG90190-18P	148.5	18	-	18
HG90190-12P/12S	148.5	12	12	24
HG90190-6P/24S	148.5	6	24	30
HG90190-36S	148.5	-	36	36
HG90190-24P	178.5	24	-	24
HG90190-18P/12S	178.5	18	12	30
HG90190-12P/24S	178.5	12	24	36
HG90190-6P/36S	178.5	6	36	42
HG90190-48S	178.5	-	48	48
HG90190-30P	208.5	30	-	30
HG90190-24P/12S	208.5	24	12	36
HG90190-18P/24S	208.5	18	24	42
HG90190-12P/36S	208.5	12	36	48
HG90190-6P/48S	208.5	6	48	54
HG90190-60S	208.5	-	60	60
HG90190-36P	238.5	36	-	36
HG90190-30P/12S	238.5	30	12	42
HG90190-24P/24S	238.5	24	24	48
HG90190-18P/36S	238.5	18	36	54
HG90190-12P/48S	238.5	12	48	60
HG90190-6P/60S	238.5	6	60	66
HG90190-72S	238.5	-	72	72
HG90190-42P	268.5	42	-	42
HG90190-36P/12S	268.5	36	12	48
HG90190-30P/24S	268.5	30	24	54
HG90190-24P/36S	268.5	24	36	60
HG90190-18P/48S	268.5	18	48	66
HG90190-12P/60S	268.5	12	60	72
HG90190-6P/72S	268.5	6	72	78
HG90190-84S	268.5	-	84	84
HG90190-48P	298.5	48	-	48
HG90190-42P/12S	298.5	42	12	54
HG90190-36P/24S	298.5	36	24	60
HG90190-30P/36S	298.5	30	36	66
HG90190-24P/48S	298.5	24	48	72
HG90190-18P/60S	298.5	18	60	78
HG90190-12P/72S	298.5	12	72	84
HG90190-6P/84S	298.5	6	84	90
HG90190-96S	298.5	-	96	96

Installation Guide
1.Position the slip ring in the desired location and tighten four screws to shaft.
2.Route the wiring and make the necessary connections,fasten the anti-rotation tab.

Attentions
1.Slip ring can not support the weight of equipment which connects with it, roating equipment should be fastened
so that its weight will not fall on the rotor.
2.Slip ring should be used in dry,low dust environment.If used outdoor,shield is necessary.
3.The surface of lead wire should avoid being damaged while equiment rotating,all lead wire can not bear
weight while you put the lead wire in order.
4.No damaging the surface of lead wire while barking its end.