Glass UV Glue

In the wavelength of 365nm - 400nm ultraviolet light, the Glass UV Glue can quickly solidify. thereby playing its bond strength which should be .

Well corrosion resistance, anti-aging, well water resistance, not becoming yellow after a long time sunlight; stable performance, bonding firm and effect is very obvious.

PRECAUTIONS FOR USE:

1, will be bonded to the two objects have a transparent and clean surface, dry and no grease;
2, the UV shadowless coating on one of the surface, close the two planes, with the appropriate wavelength (usually 365nm-400nm) and the energy of the UV lamp or lighting with high pressure mercury lamp irradiation, light from the center to the surrounding And confirm that the light can really penetrate into the adhesive site;
3, the proposed light about 6s, the initial positioning, remove the remaining glue on the workpiece and then re-light to complete curing;
4, curing time should be based on different preparation materials, glue thickness, UV intensity of different and different. It is recommended that users purchase UV intensity tester, before the light intensity test to reduce the rejection rate;
5, the temperature of the activity of the glue also have a little impact, the temperature is low when the curing time should be appropriate to extend;
6, the operation should not be forced to squeeze and repeated friction to be bonded material, and recommend the use of fixed tools;
7, plastic bonding, should consider the content of UV absorbers in plastic, high content will seriously affect the UV transmittance, and thus the curing efficiency of the glue have a significant impact, and even lead to glue can not cure;
8, a large area of adhesive recommended when using low viscosity products. Conditions are available, it is best to purchase a vacuum device, in a vacuum environment in order to remove the bubble, improve the yield;
9, the above instructions are for reference only, the specific operation of the customer needs to be adjusted according to specific circumstances