Forged Steel A105/F304/F316 150LB~2500LB Globe Valve NPT/SW/RF Ends

Forged Steel 150LB~2500LB Globe Valve Thread/Welding/Flange Ends

?RST Valve company is a industry valves manufacturer, including Thread & Flange Ball Valves, Gate Valves, Globe Valves, Check Valves, Y Strainers in stainless steel, carbon steel, cast steel, forged steel and alloy steel.

?Globe Valve mainly had Thread ends 200WOG Globe Valve, BS1873 Flange ends Globe Valve, DIN F1/F5 Standard Flange Globe Valve, Stainless Steel Flange ends Globe Valve, Carbon Steel Butt Welded Globe Valve, Stainless Steel Bellow Seal Globe Valve, Forged Steel A105/F316 Globe Valve, 800LB/1500LB Forged Steel Flange Globe Valve, Butt Welded CF8M Globe Valve, Pressure Sealed Flange Globe Valve, High Pressure 2500LB Flange Globe Valve, 150LB~900LB WCB Flange ends Globe Valve, Gear Operated Globe Valve, Globe Valve with Pneumatic/Electric Actuator.

?A globe valve, different from ball valve, is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body.Globe valves are named for their spherical body shape with the two halves of the body being separated by an internal baffle. This has an opening that forms a seat onto which a movable plug can be screwed in to close (or shut) the valve. The plug is also called a disc or disk.[3][4] In globe valves, the plug is connected to a stem which is operated by screw action using a handwheel in manual valves. Typically, automated globe valves use smooth stems rather than threaded and are opened and closed by an actuator assembly.

Specifications:

Forged steel, outside screwand yoke (OS&Y), rotatingrising stem, rising handwheel.Full or conventional port.Bolted or welded bonnet joint.T-Pattern or Y-Pattern. Integralbackseat. Integral body seat.

1.BODY. The body is forged steel and designed to the basic dimensional requirements of the applicable specifications such as API 602 and ASME B16.34. The body is available in both the full or conventional port design. It is also available in either T-pattern or Y-pattern configuration.

2.BONNET. The bonnet is forged steel, has an integral backseat and incorporates the stuffing box, which has dimensions per the applicable specifications such as API 602.

3.BODY-BONNET JOINT. Two different bonnet joint designs are available. These are either the bolted bonnet or the threaded and seal welded type.

4.GASKET. The bolted bonnet joint design valve uses a contained, controlled compression, spiral wound type gasket.

5.BONNET BOLTING. The bonnet bolting is manufactured of alloy steel in accordance with the requirements of the applicable specifications such as API 602 and ASME B16.34.

6.SEAT. The body seat is an integral weld overlay and is part of the valve trim.

7.DISC. The disc is forged steel and is part of the valve trim. The disc seating surface is of the tapered or plug type design. The disc is attached to the stem using a loose or swivel disc arrangement.

8.STEM. The stem is forged steel and part of the valve trim. It contains an integral back seat shoulder, which mates with the integral backseat of the bonnet. The stem is designed to the basic dimensional requirements of the applicable specifications such as API 602.

9.GLAND AND FLANGE. The gland, gland flange assembly utilizes a separate, two piece design. This self aligning design allows the flange to be unevenly tightened while the gland maintains its parallel alignment with the stem and stuffing box.

10.GLAND BOLTS AND NUTS. The steel/stainless steel gland bolt and nut assembly is a stud, double nut arrangement. This design allows complete removal from the valve when service is required. The use of industry standard thread full length studs and nuts also allows easy replacement should these items be lost or in need of replacement.

11.YOKE SLEEVE. The yoke sleeve is of forged stainless steel material having a high melting point and is resistant to wear and corrosion.

12.HANDWHEEL. The handwheel is forged carbon steel of an open spoke design. This robust construction along with appropriate sizing allows for ease of operation.

Design construction:

1.ASME B16.34 - BS 5352

2.Testing according to API 598

3.Marking MSS SP25

4.Outside Screw and Yoke (OS&Y)

5.Self aligning two piece packing gland

6.Spiral-wound gasket

7.Integral backseat

8.Loose solid disc

9.Socket Weld Ends to ASME B16.11

10.Screwed Ends (NPT) to ASME B1.20.1

11.Butt Welding Ends to ASME B16.25

12.Ratings:

 - carbon steel class 800 1975 psig @ 100°F(138 bar + 38°C)
 - carbon steel class 1500 3705 psig @ 100°F(255 bar + 38°C)
 
 Material List:

Competitive Advantages:

1.18 Months warranty.

2.Free sample if interest before orders.

3.Technology renovation, process improvement, structure optimization and quality improvement.

4.Excellent after-sales service system, providing timely and optimal service, which help you to win the market.

5.Convenient shipping sea port, and standard exporting carton boxes & plywood cases.

6.100% inspection & testing before delivery.

7.Third party inspection on customer requirement.

8.OEM manufacturer

9.Own factory is easy to control quality for every process.