ER-FGI1100 Fiber Optic Inertial Navigation System

Min Order

1
Product Unit

Pieces
Origin

China Mainland
Payment
Contact Now Start Order

Description

Product Detail

ER-FGI1100 Fiber optic inertial navigation system

ER-FGI1100 Inertial navigation system using triaxial fiber optic gyro sensitive vector angular motion, the proportion of digital signal output with the carrier movement angular rate; three orthogonal collocation of quartz flexure accelerometer gauge carrier sensitive linear acceleration, output with the proportion of current signal and current after I-F conversion circuit switching frequency signal input navigation computer. Computer navigation gyro, accelerometer, external data of GPS receiver, system error compensation calculation, navigation solution and to the provisions of the cycle guide through the monitoring port for external sending real-time speed, position, attitude and navigation information.

The initial alignment of NS-FGI1100 is divided into two modes: static alignment and double position alignment. The position accuracy of the two position alignment is higher than that of the static alignment.

ER-FGI1100 inertial navigation system
	Pure inertial mode		GNSS assisted navigation mode(External receiver)
Azimuth alignment accuracy	= 0.1° sec lat(1s)		Azimuth alignment accuracy	= 0.1° sec lat(1s)
Horizontal attitude alignment accuracy	= 0.02°(1s)		Horizontal attitude alignment accuracy	= 0.02°(1s)
Azimuth holding accuracy	0.05° /h		Azimuth holding accuracy	=0.05°sec lat(1s)
Horizontal attitude holding accuracy	0.03° /h		Horizontal attitude holding accuracy	= 0.01°(1s)
Positioning accuracy(50%CEP)	= 2nm/h (10min Static alignment )		Positioning accuracy	= 5m(1s)
Horizontal velocity precision(RMS)	= 2m/s (10min Static alignment )		Speed accuracy	= 0.1m/s(1s)
Positioning accuracy(50%CEP)	= 1nm/h(Two position alignment,Alignment time is less than 30min)
Horizontal velocity precision(RMS)	= 1m/s(Two position alignment,Alignment time is less than 30min)
Power and environment
Data measurement frequency	Maximum 100Hz
Power Supply	23~31V DC Power Supply,Nominal Supply Voltage27V
Power	Normal temperature steady-state power consumption is less than 17W, High and low temperature steady-state power consumption is less than 20W, Start transient power consumption is less than 50W
Working Temp	-40° C~+60°C
Storge Temp	-45° C~+80° C
Installment Dimension	180mm×180mm×160mm
Quality	?6kg
Fiber optic gyroscope index		Quartz accelerometer index
Time to Prepare= 15s		Measurement Range:-20g~+20g
Bias Stability(the average time 100s)= 0.02 ° /h(1s)		The Threshold Value:= 5×10^-6g
Bias repeatability(Stable environment,average time 100s)		Bias:=6×10^-3g
= 0.02 ° /h(1s)		Scale Factor Repeatability:= 3.5×10^-5(1s)
Random Walk Coefficient= 0.005° / v Hz		Scale Factor Temperature Coefficient:= 6×10^-5/° C(-40° C~+60° C)
Scale Factor Nonlinearity= 50ppm		The Second Order Nonlinear Coefficient:= 3×10^-5g/g²
Scale Factor Repeatability= 50ppm(1s)		Bias:= 6×10^-3g
Gyro Measurement Range= ±300° /s		Bias Repeatability:= 2.5×10^-5g (1s)
		Bias Temp Coefficient:= 2.5×10^-5g/° C(-40° C ~ +60° C)
		Band width:= 800Hz

ERICCO is expert in high quality fiber optic gyro ins manufacturing and selling, who is one of the best manufacturers and suppliers of fiber optic gyro ins with high precision. We have a professional factory at your service.

Send your message to this supplier

To:

Ericco International Limited

* Content:

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity: