Centrifugal Casting on Cylinder ID Surface
-
Min Order
1
-
Product Unit
Pieces
-
Origin
China Mainland
-
Payment
- Contact Now Start Order
- Favorites Share
- Description
Product Detail
Iron alloy powder used for Centrifugal casting on cylinder ID surface.
Global Fusion Iron alloy powder specifications:
Powder | HRC | Chemical Composition | Coating/Overlaying Process | Mesh Size | ||||||||
C | Cr | Si | Fe | Mo | Ni | Mn | B | Others | ||||
Fe101 | 62 | 3.3 | 2 | 1 | Bal |
| 5 | 1 | 1.4 |
| Centrifugal casting on cylinder ID surface | 20/300 |
Fe102 | 62 | 2.7 | 2.8 | 1 | Bal |
| 5.5 | 1 | 1.9 |
| Centrifugal casting on cylinder ID surface | 20/300 |
Fe103 | 62 | 1.5 | 4.5 | 1 | Bal |
| 7 | 1 | 2.9 |
| Centrifugal casting on cylinder ID surface | 20/300 |
Fe103-5 | 63 | 1.5 | 6 | 2 | Bal |
| 8 | 1.5 | 3 |
| Centrifugal casting on cylinder ID surface | 10/300 |
Fe103-5A | 62 | 2 | 10 | 2 | Bal | 1.1 | 7.5 | 1.2 | 3.6 |
| Centrifugal casting on cylinder ID surface | 10/200 |
Fe103WM | 61 | 1.5 | 7.2 | 2.3 | Bal | 2.5 | 10 | 0.6 | 3 | W:1.20 | Centrifugal casting on cylinder ID surface | 10/200 |
Fe104 | 60 | 1.7 | 4.5 | 1.5 | Bal |
| 11 | 0.8 | 3 |
| Centrifugal casting on cylinder ID surface | 20/300 |
Fe105 | 62 | 1.5 | 5.5 | 1.3 | Bal | 1.5 | 12 | 1 | 2.8 | W:4.50 | Centrifugal casting on cylinder ID surface | 20/300 |
Fe105W | 61 | 2 | 6 | 1.9 | Bal |
| 15 | 1 | 2.5 | W:4.50 | Centrifugal casting on cylinder ID surface | 20/300 |
Fe105W-1 | 61 | 1.5 | 8 | 2 | Bal | 1.3 | 8 | 1 | 3 |
| Centrifugal casting on cylinder ID surface | 20/300 |
Fe105W-JC | 60 | 1.5 | 8 | 2 | Bal |
| 8.5 | 1 | 3 | W:3.20 | Centrifugal casting on cylinder ID surface | 20/300 |
FJ-6 | 57 | 0.2 | 13.5 | 1.5 | Bal | 2.5 | 1.1 |
|
|
| Centrifugal casting on cylinder ID surface | 150/300 |
FJ-19 | 60 | 2.9 | 30 | 2 | Bal | 3 | 5 |
| 2.3 |
| Centrifugal casting on cylinder ID surface | 100/270 |
FJ-20 | 64 | 5 | 25 |
| Bal |
|
|
| 1.5 |
| Centrifugal casting on cylinder ID surface | 100/270 |
Introduction of Iron alloy powder:
Iron-based powder metallurgy formula technology can also be used in processing the special performance of powder metallurgy products so as to meet different operating requirements of them. In the powder metallurgy formula technology, vibration-assisting filling method is used so as to change the distribution of powder density, thus the powder will be evenly distributed and avoid that the metal powders are not fully and evenly filled, moreover, it also can reduce the crack and failure of powder metallurgy products caused by high frequency induction heating and quenching as it can reduce the induction heating equipment frequency and heating rate as well as lessen the hardness difference between the heating and non-heating area, in which the harness buffer will be generated and reduce crack risks.
Centrifugal casting process advantages:
1.Using centrifugal casting, there will be no fear of length, thickness and diameter. Castings of any length, any thickness and any diameter can be produced and manufactured easily without any limitations. (15 m )
2.Pipes, Fly Wheels and all cylinder liners can be produced using Centrifugal Casting.
3.Different thicknesses of the walls can be manufactured easily.
4.It also eliminates the necessity of the cores.
5.Centrifugal casting has its Mechanical properties at the top.
6.Cylindrical shapes of any size can be produced with ease.
7.Better surface finish can be achieved.
8.Very huge parts of heavy weight can also be produced up to 61,235 kg.
Enterprise Purpose:
Better Technology
Better Alloy
Better World
Product R&D:
Mainly research and develop new products according to customer demands to meet the existing conditions and process for the material.
Features of Global Fusion Powder:
1) Powder of three main alloys: cobalt-base alloy, nickel-base alloy, and
iron-base alloy, stellite alloy
2) Properties: good resistance against high-temperature, corrosion, wear,
shock and stick abrasion
3) Main application: use to repair and pre-protection of valve seat, pump
shaft sleeve and valve gate
4) Process: OXY, PTA, high frequency remelting
5) Specifications: 150/320, 200/400, 280/400, 180/400, 60/170, 60/200
System Construction
Perfect After-Sale Service System
Excellent Quality Control System
Advanced Production and Testing Equipment
International Standardized Professional Workshop
Construction of Laboratory
Chemical Analysis Laboratory
Metallographic laboratory
Thermal Spray Process Room
Powder Physical Performance Testing Room
Cooperative Project:
Joint Tsinghua University to develop Laser Powder and 3D consumable Powder, Joint Shanghai Jiao Tong University and Fudan University to develop alloy amorphous submicron powder material, Joint Harbin Institute of Technology to develop amorphous and submicron powder material, Joint Hebei University of Technology to develop magnetic submicron powder material, Joint Beijin Institute of Technology to develop high temperature alloy submicron powder material, Joint Tianjin University to develop remanufacturing material auto engine, Joint Tianjin University of Technology to develop laser and remanufacturing material, etc.
Technology Cooperation and Communication with Foreign Customers
- Metal Mesh Stationery Combination 1 Pieces / (Min. Order)
- JP90 Mortar Plastering Machine 1 Pieces / (Min. Order)
- JP70-P Mortar Plastering Machine 1 Pieces / (Min. Order)
- JP70-L Mortar Plastering Machine 1 Pieces / (Min. Order)
- JP60-W Mortar Plastering Machine 1 Pieces / (Min. Order)
- JP60-L Mortar Plastering Machine 1 Pieces / (Min. Order)
- JP40-I Mortar Plastering Machine 1 Pieces / (Min. Order)
- JP22 Mortar Plastering Machine 1 Pieces / (Min. Order)
- Micro Testing Machine 1 Pieces / (Min. Order)
- Automatic Box-pasting Machine WH-1100 1 Pieces / (Min. Order)
- Green Sand Blasting Machine 1 Pieces / (Min. Order)
- Manual Sand Blasting Machine 1 Pieces / (Min. Order)
- JP70-L Mortar Plastering Machine 1 Pieces / (Min. Order)
- JP22 Mortar Plastering Machine 1 Pieces / (Min. Order)
- JP90 Mortar Plastering Machine 1 Pieces / (Min. Order)
- Mixing Casting Machine 1 Pieces / (Min. Order)
- M-510 Small Washing Machine 1 Pieces / (Min. Order)
- XH-226 Vertical Elastic Test Machine 1 Pieces / (Min. Order)
- Manual belling machine SGK160M 1 Pieces / (Min. Order)
- Ceramic Casting Cold Water Machine 1 Pieces / (Min. Order)