Box-type Air Cooled Water Chiller

Cold water temperature: 6 ... 18 c

Cold water temperature requirements: ± 2 k or 0.5K

Injection molding and injection molding machines injection molding machine with a water chiller refrigeration capacity (usually known as "Oz"), injection molding more required refrigeration capacity.

Injection molding machines of clamping force generally "tonnage" nominal, it needs to be "tonnage" into "Oz", but the "tonnage" and "Oz" is not one by one, the following table only for conversion under normal circumstances and have a certain bias.

1, and injection machine with cold water unit performance stable: used multiple compressor parallel using, each compressor since with a independent of refrigeration loop, that evaporator, and condensation device also completely independent; all compressor by unified of microcomputer control system command, individually open, and shut machine, mutual Zhijian never will mutual interference, plus the brand machine all used original authentic making, single fault rate very low, integrated above reasons, can guarantee the series machine has height stable of performance, in years continuous run situation Xia of preferred, Instead of buying the machine.

2, energy saving energy saving: the parallel use of multiple small and medium power compressor, the starting current steady, when open and close on a power grid disturbances is extremely small, as the load changes, the unit will automatically determine the number of power, ensure the compressor is in top working condition of opening, thus effectively save energy.

3, long life: evaporator, condenser design is very reasonable, and placed above the compressor, run throughout the process, most of the oil remains inside the compressor to ensure good lubrication of the compressor.