90W AC Gear Motor

Disk brake installed on the DC motor non-braking motor shaft on the side of the end cap. When brake Motors connected to the power supply, brake motor work simultaneously. Due to the electromagnetic force, electromagnet attracts the armature and compression springs, brake disc to the armature-end cap off, brake motor running. When cut off power supply, electric brake motor magnets lose their magnetic attraction force, spring drive armature pressed discs, in the presence of friction torque and brake motors to cease operation immediately; YDEJ I plant also produces the corresponding two-speed (more speed, wide-ratio pole) motor. Brake rectifiers in supply electrical power from the motor junction box, AC380V-DC170V 3-kilowatt AC220V-DC99V,4 kW and below and above (also according to factory requirement when special designs such as (DC24V)) ? YEJ electromagnetic brake Motors series, motor power rapid braking can be achieved. Quick brake time YEJ2-63-90 motor is less than 0.15 seconds, YEJ-100-160 motor less than 0.20 seconds, braking can be customized by changing the terminal box of the motor connection to achieve slower braking. This series motors are low noise, reliable braking performance. Its working principle is: when the brake motor power, 198V through 220V AC rectifier to DC brake motors, armature magnetic snap, the brake disc is rotating, and braking the motor rotate freely. When the brake motor loss of electromagnet power, bit immediately spring to resist, the brake disc and motor cover together, stop turning.