32A 3.5KW Wall-Mounted EV Charging Station-Type2 Plug J1772 Electric Vehicle Charging Points

Input AC voltage: 220 V ± 10%

Output AC voltage: 220 V ± 10%

Output maximum current:  32 A

Rated power:  7.5KW

Single Phase

Charging Connect Standard:  IEC 62196-2 / J1772

Rated AC frequency:  50 Hz / 60Hz

Cord Length:  20 feet

Install:  Wall-mounted

Protective measures :earth leakage protection; Lighting strike protection; Surge protection;

Insulation resistance: use a megger of 500V open-circuit voltage to test the insulation resistance between each circuit of the AC point and its exposed conducting parts, and between each independent circuit, the measured insulation resistance = 300 MÙ.

Dielectric strength: between each electric circuit and exposed conducting parts, and between each independent circuit of the AC point, there shall be no sign of insulation breakdown and flashover when being tested under 2kV (50 Hz) AC test voltage with the duration of 1 min.

Working environment: - 20 ? ~ + 50 ?,5% ~ 95% with no condensation

Storage environment: - 25 ? ~ + 70 ?,5% ~ 95% with no condensation

Enclosure:  IP 55

Weight:  5kg

Dimensions:  570*400*280 mm

Environmental and Transportation Conditions

Professional design,  makeing BS-B10 have superior performance

Electrical safety

Comprehensive protection system

We designed all kinds of protective measures for BS-B10: Overcurrent protection, Overvoltage protection, Llightning protection, Electric leakage protection, and Short circuit protection. This is a deceive which can ensure the safety using for everyone.

Detecting faulty wiring
The intelligent BS-B10 also detects faulty wiring of the infrastructure-side socket and, in addition, controls the incoming protective conductor before charging begins.