SL400 Fluid Hydraulic Coupling Factory
-
Min Order
1
-
Product Unit
Pieces
-
Origin
China Mainland
-
Payment
- Contact Now Start Order
- Favorites Share
- Description
Product Detail
Characteristics of cross slide coupling:
1 ? high torque rigidity and sensitivity
2, the structure is simple, so that the installation is easy
3 ? super resistance to oil corrosion and electrical insulation
4. Minimize the axle load caused by the deviation
5. The sliding between the sleeve and the center allows for large radial and angular deviations
Maintenance method of cross slide coupling
1) remove burrs and clean all parts during assembly
2) the assembly shall guarantee that the center line of the middle two welding fork bearing hole is in the same plane, and the allowable tolerance shall not exceed 1 degrees, and the spline part shall be free and smooth, and the joint shall be flexible in rotation
3) cleaning the surface, in addition to the flange end, the end of the key coated with rust proof grease, and the rest of the brush rust primer, once again, paint (not painted).
4) regular lubrication, it is recommended oiling once a week, high temperature conditions, once a day.
5) in order to increase the service life of the cross slide coupling, the cross shaft should be adjusted 180 degrees at each time of disassembly so that the cross shaft journal can be used alternately.
Product detail drawing:
- Q43-1000 Hydraulic Metal Shear 1 Pieces / (Min. Order)
- Q43-4000 Hydraulic Metal Shear 1 Pieces / (Min. Order)
- Q43-1200 Hydraulic Metal Shear 1 Pieces / (Min. Order)
- Q43-800 Hydraulic Metal Shear 1 Pieces / (Min. Order)
- Q43-100t Hydraulic Metal Shear 1 Pieces / (Min. Order)
- Q43-630 Hydraulic Metal Shear 1 Pieces / (Min. Order)
- Hydraulic Climb 1 Pieces / (Min. Order)
- G Two Platen Hydraulic Four-cylinder Clamping 1 Pieces / (Min. Order)
- Hydraulic Embossing Press 1 Pieces / (Min. Order)
- Hydraulic Embossing Press 1 Pieces / (Min. Order)
- QC11Y Series Hydraulic Guillotine Shears 1 Pieces / (Min. Order)
- QC11Y-20 × 2500 Hydraulic Guillotine Shear 1 Pieces / (Min. Order)
- QC11Y-6 × 4000 Hydraulic Guillotine Shear 1 Pieces / (Min. Order)
- QC11Y-8 × 4000 Hydraulic Guillotine Shear 1 Pieces / (Min. Order)
- GP8-K13B Hydraulic Welder 1 Pieces / (Min. Order)
- Shear Bending Hydraulic Cylinder Series 1 Pieces / (Min. Order)
- CLL Series Single-Acting Hydraulic Cylinder 1 Pieces / (Min. Order)
- CLP Series Single-Acting Hydraulic Cylinder 1 Pieces / (Min. Order)
- RRH Series Double-Acting Hydraulic Cylinder 1 Pieces / (Min. Order)
- CLRG Series Double-Acting Hydraulic Cylinder 1 Pieces / (Min. Order)