Receiver With 8 Groups Of Numbers IXD-800

Beijing Yinhe Jinyuan STD Co.Ltd is one of the leading China receiver with 8 groups of numbers ixd-800 manufacturers, welcome to wholesale cheap RoHS, CE and FCC receiver with 8 groups of numbers ixd-800 from our factory.

Receiver with 8 groups of numbers IXD-800

* Easy installation, wireless, easy to operate.

* Quick registration, number is automatically incremented when a registration is done.

* Digital encoding technology, can be compatible with learning code and general code chip, system stability, long signal distance.

*Support 500pcs transmitter

* Display time (1-99s) adjustable, multiple voice modes, accompanied by English voice (services, order, bill), and voice prompts.

*Call number queuing,can automatically delete or manually deleted.

* Can be equipped with one-key, multi-keys transmitter, one call number can register multiple transmitter. 

Main Functions

F-01  Registration number

F-02  Delete mode

F-03  Cycle Period

F-04  Clear Time

F-05  Profile

F-06  Volume settings

F-07  Time Setting

F-08  Display order

F-09  Display mode

F-10  Language settings

F-11  Frequency settings

F-12  Key bits set

F-13  Factory settings

Brief Introduction of Function Operation

?  
Press [FUN] for 3 seconds, it will be in setting status. 

?  Press [DOWN] or [UP] to choose the function you need under F-01~F-13 

?  Press [ENT] to enter certain function setting status.

?  Press [LEFT] or [RIGHT] to change the digit position.   

?  Press [ENT] to confirm the setting.

Detailed Function Operation

F-01 Registration

? Press [FUN] for 3 seconds in standby mode and the screen will show [F-01].

? Press [ENT], it will show [0001].   

? Set a number you want to code for a transmitter by pressing [UP] [MOVE] and [LEFT] or [RIGHT].

? Press [ENT] again, the number you set will flash.

? press a transmitter for one second, the display will sound “Dingdong” and go to next number automatically. Now this button is coded as this number successfully.

? Press other transmitters to make and finish programming.

? Press [FUN],The display shows [F-01], Press [FUN] again to be back on standby status. 

F-02 Deletion

? Press [FUN] for 3 seconds in standby mode and the screen will show [F-01].  

? Press [UP] till it shows [F-02].

? Press [ENT], it will show [0001].

? Press  [UP] [MOVE] and [LEFT] or [RIGHT] to get the number you want to delete.  

? Press [ENT] to delete the number, the display will sound “Dingdong” to finish deletion

? Press [FUN], the display shows [F-02], Touch [FUN] again to be back on standby status. 

F-03 Cycle Period Setting  

? Press [FUN] for 3 seconds in standby mode and the screen will show [F-01].

? Press [UP] till it shows [F-03].

?Press [ENT] until it shows [000].Press [UP] [MOVE] and [LEFT] or [RIGHT] to adjust the call interval.

F-04 Clear Time Setting  

? Press [FUN] for 3 seconds in standby mode and the screen will show [F-01].

? Press [UP] till it shows [F-04].

?Press [ENT] until it shows the time such as [010].Press [UP] [MOVE] and [LEFT] or [RIGHT] to adjust clear the call interval of the next call number.

F-05 Profile Setting  

? Press [FUN] for 3 seconds in standby mode and the screen will show [F-01].

? Press [UP] till it shows [F-05].

? Press [ENT] to confirm.

? Press [UP] [MOVE] and [LEFT] or [RIGHT] to choose the tone matching applications.

a, Restaurant

b, Banks

c, Factory

d, Hospital

e, Supermarkets

f, Elevator mode

g, DingDong

h, Music

F-06 Volume Setting  

There are 6 sound levels for your choice. 1 is mute, 6 is the loudest

?Press [FUN] for 3 seconds and the screen will show [F-01].                                     

?Press [UP] till it shows [F-06].

?Press [ENT], it will show a number between [0-6].

?Change number between 0-8 by Press [UP] and [DOWN]

?Press [ENT] to confirm the number you set. 

?Press [FUN] twice to be back on standby mode.  

F-07 Clock Setting

?Press [FUN] for 3 seconds and the screen will show[F-01]                                     

?Press [UP] repeat till it shows[F-07].

?Press [ENT], it will enter setting status and the year position will flash.

?Change the position and the number by touch [UP] [MOVE] and and [LEFT] or [RIGHT].    

?Press [ENT] to confirm the setting

?Press [FUN] twice to be back on standby mode.

F-08 Display Order Setting

?Press [FUN] for 3 seconds and the screen will show[F-01]                                     

?Press [UP] repeat till it shows[F-08].

?Press [ENT] to confirm.

? Press [UP] [MOVE] and [LEFT] or [RIGHT] to choose the display order.

a, Descending of display, adjust the display order according to the requirement, such as "023" can be adjusted to "320"

b, Sequential display, adjusted to the normal display method

F-09 Display Mode Setting

?Press [FUN] for 3 seconds and the screen will show[F-01]                                     

?Press [UP] repeat till it shows[F-09].

?Press [ENT] to confirm.

? Press [UP] [MOVE] and [LEFT] or [RIGHT] to choose the display mode.

a, single-line display

b, table display, display multiple call numbers, such as "0001" order,"0003" bill

F-10 Language Setting

?Press [FUN] for 3 seconds and the screen will show[F-01]                                     

?Press [UP] repeat till it shows[F-10].

?Press [ENT] to confirm.

? Press [UP] [MOVE] and [LEFT] or [RIGHT] to choose language.

a?CHINESE

b?ENGLISH

F-11 Frequency Setting

?Press [FUN] for 3 seconds and the screen will show[F-01]                                     

?Press [UP] repeat till it shows[F-11].

?Press [ENT] to enter the setting status. 

?Press [ENT] again, the screen displays "Please press the transmitter" , press the button for 1 seconds,      digital direct changes to the button bandwidth

?Press the transmitter from other manufacturer, the number on the screen will change according to the frequency band of the transmitter. 

?Press [ENT] to confirm the setting

?Press [FUN] twice to be back on standby mode.

F-12 Key bits setting

?Press [FUN] for 3 seconds and the screen will show[F-01]                                     

?Press [UP] repeat till it shows[F-12].

?Press [ENT] to enter the setting status, the screen will show 1-8 or 2-4 or 3-2 or 4-0 or 5-1

Under 1-8, Press a key, you can set the key name as Call.  

Under 2-4, Press a key, you can set the key name as Order.  

Under 3-2, Press a key, you can set the key name as Bill (Check out).  

Under 4-0, Press a key, you can set the key name as Water.  

Under 5-1, Press a key, you can set the key name as Cancel.  

?After finish the above setting, Press [ENT] to confirm it

?Press [FUN] twice to be back on standby mode.

F-13 Factory Settings

?Press [FUN] for 3 seconds and the screen will show[F-13]                                     

?Press [UP] repeat till it shows[F-10].

?Press [ENT] to confirm.

a, set the recovery, restore the default factory settings.

b, full recovery, you can use this in the case of accidentally deleted all the data required, restore the required data.

c, the code recovery, restore one accidentally deleted number.

Specification

1. Voltage: 9V/12V

2. Current: =1A

3. Capacity:500pcs of transmitter

4. Number:0001~9999,A001~F999

5. Working Temperature: -20?-80?

6. Receiving Sensitivity:  =-105dBm

7. Frequency:315MHZ?433MHZ  

8. Size: 245mm*16mm*32mm

1, the host with the transmitter required to be coded to store the number, details see the F-01 (F storage mode).

2, If you didn’t see the reception number, you can press the minus key (DOWN) or the plus key (UP) to find the calling records, press the Enter key (ENT) to clear the number on the host.

3, transmitter key failure: the host does not answer the call, first check the transmitter indicator lights up when the transmitter is normal, if not bright or dimly lit, please replace the battery.

Suddenly the whole system does not work:

a, only a call number is displayed on the host screen, press the other transmitters no reaction, check if the transmitter’s key has been card.

b, the whole system suddenly unable to call, maybe interference caused around, to find out the signal with the same frequency or wait the same frequency signal disappearance to normal.

c, Misoperation cause the system can not function properly, please follow the instructions to re-register after restoring factory settings:

If the host is the misuse of registration status, the system can not properly call, you must press the host operating instructions to return to normal working condition or unplug the power supply and then plug it back in five seconds.

4, pull out the host antenna, by adjusting the antenna to make the signal distance and the receiver sensitivity adjusted to the best results, but the host antenna is prohibited contact with any metal.